Instructions / Assembly

18
Lighting Instructions
Prior to the first use, it is important to clean your grill with heat.
This will clean the internal parts by burning off any residue and
odor from the manufacturing process. To perform this cleaning,
operate the grill for approximately 15-20 minutes at the highest
heat setting with the cooking hood closed.
IMPORTANT
Please read these instructions before attempting to light the
grill.
Note: Match lighting tool is located on the inside of the
door.
1. Turn all gas control knobs to the
•
OFF position
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. Remove the match lighting tool and stick a match into
the end of the tool.
5. Light the match.
6. Once lit, guide the lit match under the grate.
7. Push in and turn the control knob to Max for the
burner closest to the light match. The burner should
light immediately.
8. Adjust burner control knob to the desired cooking
temperature.
Failure to open the lid before igniting
may result in an explosive flare-up,
which can cause serious bodily
injury or death.
DO NOT lean over the open grill
when lighting.
1. Open lid.
2. Ensure that all burner control knobs are in the “
•
OFF”
position.
3. Turn on the gas supply.
4. Push and turn any main burner control knob to the
“Max” position.
5. If the burner does not ignite, then immediately turn the
control knob back to the “
•
OFF” position and repeat
step 4 several times.
6. If the ignition flame and burner will not ignite within 5
seconds, turn the control knob to the “
•
OFF” position
and wait 5 minutes for the gas to dissipate and then
repeat step 4.
7. To extinguish the burner, push in the control knob and
turn clockwise to the “
•
OFF” position.
Match Lighting
Failure to follow the five-minute
waiting period may result in an
explosive flare-up, which can cause
serious bodily injury or death.