® Pellet Kettle Grill Assembly and Operating Instructions for Model: 470106 VER. 7, 7/28/2017 ! Please read this entire manual before assembling and using this pellet fuel burning appliance. Failure to follow these instructions could result in property damage, bodily injury or even death. A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
PAGE 2 ® READ FIRST! RULES FOR PELLET KETTLE GRILL SAFE OPERATION. • WARNING! THE GRILL IS FOR OUTDOOR USE ONLY! • WARNING! NEVER USE GASOLINE, GASOLINE-TYPE FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR "FRESHEN UP" A FIRE IN THIS APPLIANCE. KEEP ALL SUCH LIQUIDS AWAY FROM THE APPLIANCE WHEN IN USE. • DO NOT STORE FLAMMABLE LIQUIDS OR MATERIALS ON THE BOTTOM SHELF OR SIDE SHELF. • THE GRILL IS FOR ADULT USE ONLY.
PAGE 3 ® READ FIRST! RULES FOR PELLET KETTLE GRILL SAFE OPERATION. ! CARBON MONOXIDE HAZARD! BURNING WOOD OR CHARCOAL PRODUCES CARBON MONOXIDE, WHICH HAS NO ODOR AND CAN CAUSE DEATH IF BURNED IN ENCLOSED AREAS. NEVER BURN WOOD OR CHARCOAL INSIDE HOMES, VEHICLES, TENTS OR ANY OTHER ENCLOSED AREAS.
PAGE 4 ® HARDWARE AND SMALL PART LISTING x 15 x8 AA AB (15) M6 x 12MM BOLT (8) M8 x 15MM HEXBOLT x 12 x2 x4 AC AE AF (12) M6 FLANGE HEXNUT (2) M10 LOCKING HEXNUT (4) 20MM WASHER
PAGE 5 ® ASSEMBLED PARTS B (1) LID A F (1) MAIN GRILL ASSEMBLY (1) BOTTOM SHELF C D E (2) FRONT LEGS (1) RIGHT BACK LEG (1) LEFT BACK LEG K L H (1) LID HANDLE (1) CHIMNEY ASSEMBLY (1) COVER
PAGE 6 ® ASSEMBLED PARTS R (1) MEAT PROBE M (1) HEAT DIFFUSER S T (2) LOW GREASE TRAY HOLDERS (1) HIGH GREASE TRAY HOLDER N (1) DRIP TRAY V (2) WHEELS P (1) COOKING GRATE W (2) WHEEL COVERS Q (1) GREASE BUCKET X (1) WHEEL AXLE
PAGE 7 ® EXPLODED VIEW FOR ASSEMBLED PARTS L B K PELLET KETTLE PARTS A. B. C. D. E. F. H. K. L. M. N. P. Q. R. S. T. V. W. X. P N M T S MAIN . . . GRILL . . . . . .ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 LID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 FRONT . . . . LEGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 RIGHT . . . .BACK . . . . .LEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 LEFT .
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 8 ® D A Phillips or plain screwdriver and adjustable wrench are needed for assembly. C Assembly time: 45 minutes E STEP STEP 1: ASSEMBLE THE LEGS 1 AB Very carefully turn the main grill assembly [ A ] over. Assemble the (2) front legs [ C ] to the main grill using (4) hexbolts [ AB ]. Tighten securely. Assemble the (2) back legs [ D,E ] to the main grill using (4) hexbolts [ AB ]. Tighten securely.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 9 ® TAB AC F TAB STEP 3: ASSEMBLE BOTTOM SHELF Align the bottom shelf [ F ] with the tabs on the legs and assemble with (4) 12MM bolts [ AA ] and (4) M6 flange hexnuts [ AC ]. Tighten bolts securely. AA STEP 3 DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 10 ® STEP 4: 5: ASSEMBLE LID THEAND LOCKING RING TEMPERATURE PROBE Insert the temperature probe through the slot on the lid [ B ]. See STEP 4A. Assemble the lid to the hinge using (2) 12MM bolts [ AA ] and (2) M6 flange hexnuts [ AC ]. Assemble the temperature probe using (1) 12MM bolt [ AA ] and (1) M6 flange hexnut [ AC ]. Align the probe so the tip is pointing upwards. See STEP 4B. B Add cooking oil to the pins and hinge. SEE STEP 4C.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 11 ® K AA B STEP 5: ASSEMBLE THE LID HANDLE Align the lid handle [ K ] with the holes in the lid and assemble using (2) 12MM bolts [ AA ]. Tighten securely. STEP 5 DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS STEP 6: ASSEMBLE THE CHIMNEY ASSEMBLY Align the chimney assembly [ L ] with the lid. Assemble using (3) 12MM bolts [ AA ] and (3) M6 flange hexnuts [ AC ]. Tighten bolts securely. PAGE 12 ® B L AA AC STEP 6 DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 13 ® STEP 7: ASSEMBLE THE DRIP PAN HOLDERS Assemble (1) low drip pan holder [ S ] to the back of the firebowl using (1) 12MM bolt [ AA ]. This bolt will thread into the hinge. Assemble (1) low drip pan holder [ S ] to the side shelf side of the firebowl using (1) 12MM bolt [ AA ] and (1) M6 flange hexnut [ AC ]. Assemble (1) high drip pan holder [ T ] to the firebowl using (1) 12MM bolt [ AA ] and (1) M6 flange hexnut [ AC ].
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 14 ® STEP 8 STEP 8: PLACE HEAT DIFFUSER Place the heat diffuser [ M ] onto the fire pot. Make sure the diffuser is fully inserted and level. M FIRE POT ! WARNING! DO NOT OPERATE GRILL WITHOUT THE HEAT DIFFUSER IN PLACE. DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 15 ® STEP 9 STEP 9: PLACE DRIP TRAY Align the drip tray [ N ] tube with the slot and place the drip tray on the holders. N TUBE SLOT The drip tray will rest in an angled position. This allows the grease to move to the hole so it drop into the grease bucket to be collected. ! WARNING! DO NOT OPERATE GRILL WITHOUT THE HEAT DIFFUSER OR DRIP TRAY IN PLACE. DO NOT RETURN PRODUCT TO THE STORE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 16 ® P STEP STEP 10: PLACE COOKING GRATE Place the cooking grate [ P ] onto the holders. The bars should align with the front of the grill. DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 17 ® STEP 11: PLACE GREASE BUCKET Hang the grease bucket [ Q ] on the hook located on the tube. The grease bucket must be used at all times. GREASE BUCKET HOOK Q STEP 11 DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PELLET KETTLE ASSEMBLY INSTRUCTIONS PAGE 18 ® H STEP 12: PLACE COVER Fold the side shelf down. Place cover [ H ] on grill and use the pull strings to tighten. Keep the grill out of the weather and elements. Use cover only after the grill is completely cool to the touch. STEP 12 DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-877-347-4557 FOR ASSISTANCE.
PAGE 19 ® OVERVIEW OF THE ASSEMBLED GRILL These are the main components of the Pellet Kettle. The Pellet Kettle uses an electrically powered auger and fan that is connected to a control panel to control the burning of fuel pellets for temperature and smoke. Hopper lid Open the hopper lid and add pellet fuel to the grill as needed. Keep the hopper lid closed at all times. Do not expose the pellets to any type of moisture or liquid.
PAGE 20 ® BE AWARE OF HOT AND MOVING PARTS Inside the grill and hopper, there are moving parts and hot parts that the grill user must be aware of. Keep hands and fingers away from these parts. HOPPER LID LID SCREEN GUARD FIREBOWL HOPPER The hopper screen guard must be in place during use. If the screen is removed for cleaning, it must be put back in place prior to use. The screen guard is there to keep hands and fingers away from the auger.
PAGE 21 ® CONTROL PANEL INTRODUCTION 1 2 3 4 5 6 7 6 DIGIT LED DISPLAY Monitors current grill functions and status of the grill. Dual temperature monitor of setting and current temperatures. 10 SETTING CONTROL DIAL Controls the grill temperature setting, rotate to setting desired. When the dial is turned to SHUT DOWN, the shut down mode begins. The fan will run for 8 minutes to burn off any remaining pellets in the fire pot.
PAGE 22 ® INITIAL FIRING INSTRUCTIONS Follow these instructions when the grill is going to be used for the first time. Follow these instructions anytime the grill runs out of pellets. INITIAL FIRING 1. Make sure the grill is unplugged and the control dial is set to the SHUT DOWN position. 2. Remove the cooking grate, drip tray and heat diffuser from the firebowl and set aside. Observe there are no foreign objects in the firebowl or fire pot. 3. Open the hopper lid.
PAGE 23 ® INITIAL SEASONING INSTRUCTIONS Prior to first use, follow these steps to season your grill and rid the grill of any manufacturing residues and paint odor. 1. Open the lid, press POWER button on and turn the dial to SMOKE. 2. After a few minutes the pellets will ignite. When the pellets ignite, smoke will come from under the cooking grate. 3. Close the lid, open the lid vent to full open. 4. Turn the dial to HIGH and run for 1 hour. 5. After 1 hour, turn dial to SHUT DOWN. 6.
PAGE 24 ® HELPFUL OPERATING TIPS 1. The temperature setting can be adjusted at anytime during use. The grill will increase temperature faster than decrease. 2. The grilling temperature is sensitive to the climate it is being used in. If the outdoor temperature is hot, a lower setting may need to be used to reach the desired cooking temperature. If the outdoor temperature is cold, a higher setting may need to be used to reach the desired cooking temperature. 3.
PAGE 25 ® MAINTENANCE, GRILL CLEANUP AND STORAGE All cleanup procedures are to be performed only while the smoker is turned off, completely cooled except where noted and unplugged from the electrical source. After every use. Clean the cooking grate with a cleaning tool while the grill is still warm. Check for grease and ash buildup. Empty the grease bucket. Drip tray The drip tray and surrounding areas should be cleaned periodically and checked for grease build-up.
PAGE 26 ® TROUBLESHOOTING PROBLEM CAUSE SOLUTION 1. Verify there is a flame in the fire pot, if not turn the dial to SHUT DOWN and then to SMOKE in the same sequence to restart. 2. Verify there are pellets in the hopper and add pellets to the hopper if needed. 3. Press FEED to fill the auger. 4. Restart the grill. FLAME 1. Flame has gone out. 2. Temperature has dropped below setting for more than 10 minutes. SENSR 1. Error with the temperature sensor. 1.
PAGE 27 ® TROUBLESHOOTING PROBLEM CAUSE SOLUTION 1. Pellets not reaching the fire pot 1. Verify there are pellets in the hopper. 2. Verify auger is rotating. 3. If there are pellets in the hopper and the auger is turning, it may take up to 5 minutes for the pellets to reach the fire pot. 4. If the auger is not rotating, check the auger for jams and clear. 5. If the problem cannot be resolved contact the manufacturer. GRILL DOES NOT REACH THE SET TEMPERATURE 1.
PAGE 28 ® MAIN GRILL ASSEMBLY PARTS MAIN GRILL ASSEMBLY PARTS E1. E2. E3. E4. E5. E6. AA. AC. AL. AL QTY LID HINGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 PELLET HOPPER . . . . . .HOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 AUGER SCREEN . . . . . .GUARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 PELLET HOPPER . . . . . .LID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 PELLET HOPPER . . . .
PAGE 29 ® PELLET BURNER ASSEMBLY PARTS P1 PELLET BURNER PARTS P1. P2. P3. P4. P5. AL. AN. QTY PELLET . . . . BURNER . . . . . . . .ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . .1 AUGER . . . . .MOTOR . . . . . . .ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . .1 AUGER . . . . .HOUSING . . . . . . . .ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . .1 FIRE . .POT . . . ./ .IGNITOR . . . . . . . .ROD . . . .ASSEMBLY . . . . . . . . . . . . . . . . . . . .1 FAN . .
PAGE 30 ® CONTROL PANEL WIRING DIAGRAM AND PARTS AL MEAT PROBE C1 C2 TEMPERATURE PROBE INSIDE GRILL BL AC K /B LA C RE D/ AUGER MOTOR K BLACK / BLACK WH ITE Rated Voltage: 120V / 60Hz Input power: 20W Motor speed: 1.
PAGE 31 ® ! ! ! WARNING! NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START OR RESTART FIRES IN THIS GRILL. ! HOT! ! ! ! WARNING! HOT SURFACES DURING USE! USE MITTENS OR GLOVES ON THESE PARTS. ! ! ! ! ! ! ! SIDE SHELF 15 LBS. MAX. ! ! Congratulations on your purchase of the Pellet Kettle Grill! At Landmann USA, we strive to provide you with an easy to use, easy to assemble product.
® LIMITED WARRANTY Landmann USA (“Landmann”) warrants that this product shall be free of defects in material and workmanship to the original purchaser for 1 year. This limited warranty is made exclusively to the original customer presenting proof of purchase. This warranty is limited to non-commercial residential use only. Any returned goods must be shipped prepaid.