P LANDMARK ‘ © Vista PLEASE READ ALL RULES FOR SAFE OPERATION AND FOOD SAFETY BEFORE USING. i 70 Smoky Mountain Series® Vista Charcoal Grill Assembly and Operating Instructions for Model: 560200 VER.
LAY LS RULES FOR VISTA CHARCOAL GRILL SUPERSATURATION. « THE GRILL IS FOR OUTDOOR USE ONLY! © KEEP THE GRILL A MINIMUM OF 10 FT. AWAY FROM BUILDINGS STRUCTURES, ANY FLAMMABLE ITEMS AND VEHICLES DURING . USE. o NEVER USE THE GRILL UNDER COVERED PORCHES, AWNINGS, YOWL HANGING TREE BRANCHES, TRELLIS, OR OVERHANGS OF ARY KIND. » NEVER USE INSIDE ENCLOSED AREAS SUCH PATIOS, GARAGES, ENCLOSED ROOMS, BUILDINGS OR TENTS. « ALWAYS USE THE GRILL ON A HARD, STABLE AND LEVEL SURFACE. = THE GRILL IS FOR ADULT USE ONLY.
i LANDMARK vista {29) M6 x COMM BOLT (8) M6 x VIM STUD BOLT HEX NUT CHARCOAL DOOR FINISHING WASHER 35MM BOLT {3} M4 x 10MM BOLT HANDLE FINISHING WASHER " HARDWARE AND SMALL PART LISTING MIASMA BOLT ) {2) HINGE PiN @)(3 @ {3) Ma HEX NUT () x10 @ {10} FLAT WASHER x4 PAGE 3 x4 {4) MiB x 16MM BOLT %2 (2) COTTER PIN xZ {2) M6 LOCKING HEX NUT @2 x 10 (10} LOCKING WASHER
QS‘ PAGE 6 LANDMARK vista PART LISTING {1) CHIMNEY (2) VENTS {2) LEG FEET e = {1} CHARCOAL PAN {1) CHARCOAL DOOR {1} CHIMNEY CAP ADJUSTMENT HANDLE ASSEMBLY HANDLE ASSEMBLY LID HANDLE {1) ASH TRAY (1) CHARCOAL @ up (2} LID HANDLE DOOR HANDLE KEY ~ UPPER HINGE SLOWER HINGES
Phillips or lain screwdriver, adjustable wrench and beadle nose pliers are needed for assembly. Assembly time: 60 minutes STERN: ASSEMBLE THE BACILLI PANEL Bok ]SS VRN Arrange the back panel [B }, left [ €C ] and right | DD ] panels as shown. (Make sure the left and right panels are on the correct side.) Align threaded inserts with the holes and assemble using (4) M6 x TUMMY bolts [ BC). Tighten bolts securely. i ST Ali?n front panel’] EE ] with the left and right panel threaded [inserts.
B e e ASSEMBLY INSTRUCTIONS Align the bottom shelf { H] with the leg threaded inserts and assemble using {4) M6 x 10MM bolts [ BC]. Tighten bolts securely. Place wheal axle [ S ] into the left side feg holes. Slide the (2) wheels { /] onto the axle and assemble using (2} M10 docking hex nuts [ B) 1. Tighten until the axle threads reach the plastic on the docking hexameter. DO NOT RETURN PRODUCT TO THE STORE. TROUBLE WITH ASSEMBLY; PLEASE CALL .| FOR ASSISTANCE.
PAGE 9 VISTA CHARCOAL GRILL ASSEMBLY INSTRUCTIONS STEP 6 ASSEMBLE THE CHARCOAL N Rehang Assemble the left and right charcoal pan brackets [ F1,F2] to the charcoal pan [ F 1 using (4) M6 x 10MM [ BC] bolts. See STEP 6. , Manning vista Arrange the charcoal pan assembly shown and move into the firebox. See STEP 6. Assemble the charcoal pan assembly [Toff the panel inserting the tab into the slot and secure using (1) 16 x 10MM [ BC | bolt per side.” See STEP 6A.
PAN: ADJUSTMENT HANDLE Thread the charcoal pan adjustment handle [ X1 into the threaded sleeve. Turn the handle and make sure the pan moves up and down freely. GBI 8 Assemble the charcoal door handle the door as shown. Place the finishing washer [ AD | between the door and the handle on the outside. The handier key [ AC ] will lock onto the straight sections on the handle.
VISTA CHARCOAL GRILL ASSEMBLY Insert the chimney [ T | from inside the lid through the hole. Assemble with (3} M4 x 10MM bolts [ BQ ] and (3) M4 hex nuts | BR]. Tighten bolts securely, Place the chimney cap [ Z] on the chimney and assemble Using (1) M6 x 10MM bolt flat washer [ BM ] and (1) lock washer [ BN ). See STEP 11A. Tighten enough to allow the cap g move. GTe e Assemble the lid handle the lid 1 A{using {2) M5 X 16MM bolts [ BF ] and (2) finishing washers [ BA 1.
“'VISTA CHARCOAL GRILL ASSEMBLY INSTRUCTIONS PAGE 13 w LANDMARK vista STEP 13;ASSEMBLE THE:SIDE SHELVES Align chicle shelf in a vertical position as shown and assemble using (2) M6 x 18MM stud bolts [ BG 1. Make sure the shelf opening engages on the stud so the shelf can rotate, Assemble (2) M6 x 18MM stud bolts the legs for locking the shelf in the upright position, Repeat for the other side. R e Place the {2) cast iron cooking grates [ P} on the grill as shown.
ASSEMBLY INSTRUCTIONS LANDMARK vista Assemble the warming grate [ Q 11o the cooking chamber by aligning the rods and legs with holes, Assemble as shown. DO'NOT RETURN.PRODUCT TO THE STORE: 1F YOU HAVE QUESTIONS OR HAVE: otk FOR ASSISTANCE.
o LANDMARK vista ISy OF CHARCOAL PAGE 13 1. Pour the desired amount (5 ibs. MAX.) of charcoal onto the charcoal pan. 2. Keep all charcoal Inside the pan. Do not allow charcoal to come in contact with the sides. Pick up any loose charcoal that falls onto the ash pan. 3. Adjust all vents to full open and keep the lid open. 4. Light charcoal according to the charcoal manufacturer instructions. 5, After the flames have disappeared from the charcoal, case the lid, keep all vents full open. 8.
; : PAGE 16 BONDMAN vista FOOD TEMPERATURES If you are unsure about when food is done, use this chart as a guide for measuring properly cooked meat temperatures. Use a high quality meat thermometer with probe to measure the meat temperature. Push probe into the thickest part of the meat to get an accurate measurement. The temperature gauge on the grill measures the air temperature of the grill cooking chamber, not the food temperature. Steaks & Roasts Medium rare .. . 145°F Medium..
e &@ WARNING! NEVER USE GASOLINE, ALCOHOL OR: VOLATILE FLUIDS'TO START.OR RESTART FIRES. A WARNING! HOT.SURFACES DURING USE! USE MITTENS GR GLOVES ON THESE PARTS, PG PO NQT OPERATE GRILL: WITHOUT ASH. TRAY. TRAY DURING USE. KEEP: ALL ASHES HAVE COOLED.