Installation Instructions

2
1
For Installation Questions Contact:
1234
STEP 4B
Complete installation by applying
Accent Bond™ adhesive on top of
column base unit using 3/8” bead.
Be careful not to apply bead near
outside edge (1).
Place cap in position and apply
moderate hand
pressure to insure
bonding (2).
Adhesive will
start to set in
a few hours
and will be fully
cured in 48 hours.
NOTES:
A. These columns are not designed for load
bearing applications.
B. Touch-up paint kits are available for purchase.
Call Architectural Composite Technologies at
800-664-7241.
Architectural Composite Technologies, LLC
P.O. Box 3056 • Elkhart, IN 46515-3056
1-800-664-7241 • www.actaccents.com 70ES08 0108
STEP 5 - Attaching Fencing to Column
Slide a 1” x 6” deck board or pressure treated lumber
through EZ-Mason Bracket. Attach
brackets from the outside,
screwing through fencing
into the column, into the
board. Note: This is for
fence attachments only.
Gates will require a free
standing post next to column.