Panel Ready Install Sheet

Produced by:
Living Direct, Inc.
8606 Wall Street, Suite 1600 Austin, TX 78754
LANDMARKAPPLIANCES.COM
©2021 Landmark
2
1) Open the door to a 90° angle.
2) Use a Phillips screwdriver to remove the screws from the hinges at the top and bottom of the door (4 total). Set screws aside in a safe location.
3) Lay the door on a solid surface with the front glass panel facing downward. We recommend placing the door on a moving blanket, sheet of cardboard, or
other soft material before proceeding.
4) Peel away and remove the door gasket from the inside of the door frame as shown below. We recommend starting at one corner and gently pulling to
avoid tearing the gasket. Set the gasket aside in a safe location.