Panel Ready Install Sheet

ManualsBrandsLandmark ManualsAppliances24 Inch Wide Single Zone Wine and Beverage Cooler with Alternating (Blue, White, Amber) LED lighting, Door Alarm, Touch Control Panel and Lockable Left Hinged Door

Produced by:

Living Direct, Inc.

8606 Wall Street, Suite 1600 Austin, TX 78754

LANDMARKAPPLIANCES.COM

5) Place the door (with the glass panel facing downward) on top of the overlay panel as shown below. Align the top edge of the overlay panel with the top

edge of the door frame. We recommend clamping the two pieces together before proceeding to prevent movement and misalignment.

6) Drill pilot holes into your overlay panel using the screw hole openings in the Landmark door for exact placement.

7) Use #6 wood screws of the correct length to secure the overlay panel to the door. The length of screw depends on the thickness of your overlay panel.

Take care to ensure the screws are not too long to avoid them protruding though the overlay panel.

8) Your Landmark refrigerator comes with a standard towel bar handle. If you choose to install this handle, do so using the designated holes in the door.

Hole positioning is shown on the Screw Placement diagrams on the following pages.

9) Replace the door gasket.

10) Reinstall the door by screwing the top and bottom hinges into the cabinet with a Phillips screwdriver.

Door Overlay

Landmark Door

IMPORTANT

Warning: Never install a solid overlay panel on a glass door unit.