PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION SHEET P/N 164703 LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET Instructions for Ordering Parts ** Repair parts must be ordered through an authorized dealer ** DEALER INSTRUCTIONS FOR ORDERING PARTS FROM LANDOLL PARTS DISTRIBUTION CENTER PHONE #: 800-423-4320 OR 785-562-5381 ORDER ONLINE: comnet.landoll.com Understanding Safety Statements • Examine safety decals and be sure you have the correct safety decals for your machine. Order replacement decals through your Brillion dealer.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET PT 10 INSTALLATION ! Install reflectors: WARNING Lower machine to ground before removing any hardware Install light brackets: 1. Position the inner light brackets for red lamps to be within 48" of the center of the machine. Secure with the U-Bolt and locknut. See Figure 1-1. 2. Secure outer light brackets with outer bearing hanger U-Bolts. Install warning lamps: 1.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET LIGHT MODULE (2) HHCS, 5/16-18 X 1 (2) WASHER, FLAT 5/16 (2) NUT, NY-LOK 5/16-18 (1) SMV W/BKT.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET PT 12, 14, 16 INSTALLATION ! WARNING Lower machine to ground before removing any hardware. Install light brackets: 1. Position the inner light brackets for red lamps within 48" of the center of the machine. See Figure 1-2. 2. Secure outer light brackets with outer bearing hanger U-Bolt. Install warning lamps and reflector brackets: 1.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET WISHBONE EXTENSION 20’ AG HARNESS RED/ORANGE REFLECTIVE AMBER REFLECTIVE RED REFLECTIVE AMBER LIGHT TUBE LIGHT SHIELD (8) FLAT WASHERS ½” (8) HHCS 1/4-20 X 1-1/2” AMBER REFLECTOR (FRONT FACING ON OUTER LAMPS ONLY AND OUTER SURFACES OF WHEEL ARMS LIGHT MOUNT BKT. NUT FLANGE LOCK 1/4-20 DECAL PLATE RED/ORANGE REFLECTOR LIGHT MODULE (2) HHCS, 5/16-18 X 1 (2) WASHER, FLAT 5/16 (2) NUT, NY-LOK 5/16-18 (1) SMV W/BKT.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET PT 17, 18, 20 INSTALLATION ! WARNING Lower machine to ground before removing any hardware Install light brackets: 1. Position the inner light brackets for red lamps to be within 48" of the center of the machine. Secure with U-bolt and locknut. See Figure 1-3. 8. Adjustment is provided to compensate for high drawbar heights if used as a companion tool or lower heights if towed directly behind a tractor. 9. Tighten all hardware.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET DECAL PLATE LIGHT MODULE (2) HHCS, 5/16-18 X 1 (1) SMV W/BKT.
PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION BOOKLET Table 1-1: Tightening Torque Table Bolt Grade Thread Size GRADE 2 GRADE 5 GRADE 8 Plated, Stover Lock Nuts GRADE B MIN/MAX GRADE C MIN/MAX 1/4-20 5 8 12 5/7 7/10 5/16-18 11 17 24 10/12 11/16 3/8-16 20 30 45 15/20 20/28 7/16-14 30 50 70 23/32 31/43 1/2-13 50 75 105 37/50 45/62 9/16-12 70 110 155 50/70 70/95 5/8-11 100 150 210 70/95 90/122 3/4-10 170 270 375 125/165 155/210 7/8-9 165 430 610
Document Control Revision Log: Date 01/2012 Revision Improvement(s) Description and Comments Initial Release
Equipment from Landoll Corporation is built to exacting standards ensured by ISO 9001:2008 registration at all Landoll manufacturing facilities. PT PULVERIZER WARNING LIGHT INSTALLATION INSTRUCTION SHEET P/N 164703 LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM Copyright 2011. Landoll Corporation - Author Tech Comm Bill "All rights reserved, including the right to reproduce this material or portions thereof in any form.
