Owner manual

3-8 F-140-0512 Edition
ASSEMBLY INSTRUCTIONS
Figure 3-6: Shield Installation (Option)
Shields
1. Mount the shield bracket centered over the shank
(See Figures 3-4 and 3-6) during shank installation.
(See “Shank Assembly” on page 3-6.)
2. Install the shank u-bolt over the shank, through the
frame tool mount and the shield mounting bracket.
Secure with 5/8-11 hex lock nuts.
IMPORTANT
The outer end tool frames only have a half shield,
found on the inside of the tool assembly.
545m104649 op
FRAME TOOL
MOUNT
TOP VIEW
ASSEMBLED
SHANK
SHIELD MOUNTING
BRACKET
SHANK
U-BOLT
SHANK