Owner manual

OPERATION AND MAINTENANCE
4-9
Shields
Adjust the shields by moving the shield adjustment chain
up or down one link at a time until the desired height is
reached (See Figure 4-8.) The shield width can be
adjusted by loosening the adjustment screws and sliding
the shields in or out to the desired width. Tighten the
adjustment screws.
Lift Assist Wheel
Adjust the optional lift assist wheel so that when the
machine is in use, the lift assist wheel is lifted clear of the
ground. Raise or lower the lift assist wheel, as needed,
with the adjustment screw on top of the lift assist wheel
frame (See Figure 4-9.)
Figure 4-8: Shield Adjustment
Figure 4-9: Lift Assist Wheel Adjustment
WIDTH ADJUSTMENT
SCREW
SHIELD ADJUSTMENT
CHAIN