Operators Manual v.F-640-0513 05/2013 Owner's manual

4-2 F-640-0513 Edition
OPERATION AND MAINTENANCE
Tractor Preparation
The Landoll 4630-36 Folding Seeder is designed to be
pulled by tractor equipped with a double lip or clevis type
hitch. If your tractor is not equipped as such, you need to
purchase the hitch from your local tractor dealer.
Before attaching the Seeder Hitch, prepare the tractor as
follows:
1. Inflate the rear tractor tires equally and add ballast
according to the tractor operator’s manual.
2. Lock the tractor drawbar in the center position.
Seeder Hitch Preparation
1. Prior to operating the 4630-36 Folding Seeder, read
and understand the operator's manual and all decals.
2. Inspect the machine thoroughly for good operating
condition.
3. Replace worn or missing parts.
4. When the machine is new, check the bolt tightness
after a few hours of operation. Tighten any loose nuts
or bolts. Check the lift wheel lug bolts daily.
5. Check the lift wheel tire inflation. Inflate all tires
equally to avoid side draft. Follow the tire
manufacturer’s recommended pressures listed on
the sidewall of the tires.
6. Lubricate the machine (See “Lubrication
Maintenance” on page 4-17 and Figure 4-12 on
page 4-16).
7. Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.