User Manual

OPERATION AND MAINTENANCE
4-25
Storage
1. The service life of the Disc will be extended by proper
off-season stor age practices. Prior to storing the unit,
complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective part s.
Replace as needed.
c. Repaint all areas wh ere the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks,
points and discs.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Maintenance” on page 4-24.
2. S tore the un it in a shed or under a tarpa ulin to protect
it from the weather . The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.
3. If the unit mu st be stor e d ou tside, unfo ld the Disc to
prevent moisture buildup in the disc gang and wheel
bearings.
4. If the unit is stored in the folded position, make sure
the transport lock pin s ar e ins talled to pre ven t win g
frames settling.