Instruction Manual

2-2 7K458
OPERATION
Attaching to a Tractor
When hooking up seeders:
• Attach tractor.
• Remove klik pin, pull parking pin into outer position,
• Replace klik pin.
When unhooking seeder:
• Remove klik pin, push in parking pin,
• Replace klik pin.
• Disconnect tractor.
On LSS6, skid steer models, there is a parking pin
located on each side of the frame. In addition, a quick
attach frame attaches to the rear frame tube of the
seeder by means of two pins and klik pins. See
Figure 2-2.
Figure 2-2: Attaching to a Tractor
PA R K I NG
PIN
KLIK
PIN
Use this hole when
(Use this hole when
connected to tractor)
Parking Pin
(each side)
Quick
Attach
Frame
Pin,
(2) Klik pins
Disconnected from the tractor