Instruction Manual

OPERATION
2-5
Doubling the Seed Rate
Seed rates can be doubled by using the 26-tooth
sprocket and extra chain links included with the seeder.
See Figure 2-8.
Procedure is as follows:
1. Loosen drive chain.
Figure 2-8: Speed Up Kit
2. Open chain at connector.
3. Remove 1/4” roll pin in 13- tooth sprocket and 3/4”
nut on 26-tooth sprocket. See Figure 2-9.
4. Exchange sprockets to new positions and replace roll
pin and nut.
5. Add extra chain links as provided with this seeder.
Adjust chain tension as shown on page 4-3.
Figure 2-9: Doubling the Seed Rate
DRIVE CHAIN SET FOR
13-TOOTH SEED RATE
REMOVE
26-TOOTH
SPROCKET
ADD EXTRA
LINKS
REMOVE 1/4”
ROLL PIN
DRIVE CHAIN SET FOR
26-TOOTH SEED RATE
REPLACE
1/4” ROLL PIN
STORE
13-TOOTH
SPROCKET
3/4” NUT
3/4”NUT
3/4” NUT