LG35R USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product 2. The product should be powered by a three pin `grounded (or earthed) plug connected to a power socket with a grounded earth outlet. 3. All safety and operating instructions should be retained for future reference 4. Obey all cautions in the Operating instructions and on the back of the unit 5.
Page 3 /12
Laney OPERATING INSTRUCTIONS BEFORE SWITCHING ON After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into the power supply ensure you are connecting to a grounded earth outlet. If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where the amplifier is to be used is strictly conformed to.
Laney OPERATING INSTRUCTIONS Dear Player, Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney family. Each and every Laney unit is designed and built with the utmost attention to care and detail, so I trust yours will give you many years of enjoyment. Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in my parent’s garage.
Laney OPERATING INSTRUCTIONS 1 2 3 5 6 7 8 9 10 11 LG35R VOLUME ON DRIVE MASTER SCOOP BASS MID TREBLE REVERB 12 13 14 CD/LINE IN FOOTSWITCH EXT.SPKR 15 17 PHONES POWER 1 0 4 16 FRONT PANEL CONTROLS 1 2 This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened cable. Controls the overall volume level for the clean channel. 3 Switch in to activate the overdrive ‘Crunch’ channel.
Laney OPERATING INSTRUCTIONS 10 Controls the amount of treble present on the clean channel. 11 Controls the amount of reverb applied to the signal. 12 Fancy playing along with a backing track? Connect your CD/MP3 player here. 13 Connect a Laney FS2 footswitch here (not included) to allow remote switching of the drive channel and reverb on/off. Note, that the drive channel must be active (with ) and the reverb level control turned up (with ) for this to work.
Laney OPERATING INSTRUCTIONS POWER CONNECTION 18 The mains lead protudes from the underside of the chassis for connection to your power source. (Always switch off and unplug the power cord from the wall socket when not in use) Make sure the specified voltage is correct for your country! The correct 19 mains voltage is indicated on the rear panel This drawer contains the main safety fuse for 20 the unit. USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL.
Laney OPERATING INSTRUCTIONS QUICK START SETTINGS - CONTINUED LG35R VOLUME ON DRIVE MASTER SCOOP BASS MID TREBLE REVERB CD/LINE IN FOOTSWITCH EXT.SPKR PHONES POWER 1 IN 0 BLUES SETTINGS LG35R VOLUME ON DRIVE MASTER SCOOP BASS MID TREBLE REVERB CD/LINE IN FOOTSWITCH EXT.SPKR PHONES POWER 1 IN 0 ROCK SETTINGS LG35R VOLUME ON DRIVE MASTER SCOOP BASS MID TREBLE REVERB CD/LINE IN FOOTSWITCH EXT.
Laney OPERATING INSTRUCTIONS SAMPLE SYSTEM General Notes Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your equipment. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE turning on your guitar amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers.
Laney SPECIFICATIONS Supply Voltage Mains Fuse Power Consumption Output Power Rating Loudspeaker Features EQ Input Impedance Size Unit Weight Packing Weight OPERATING INSTRUCTIONS ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option ~220V>~240V = T250mA L.
BLOCK DIAGRAM HEADPHONES CD IN INPUT CLEAN POWER AMP EQ SECTION EXTERNAL LOUDSPEAKER REVERB SCOOP INTERNAL LOUDSPEAKER DRIVE FOOTSWITCH Laney POWER TO THE MUSIC METAL BLUES JAZZ ROCK AMPICONS ARE HERE TO HELP! @ In the interest of continued product development, Laney Reserves the right to amend product specification without prior notification.
