OPERATING INSTRUCTIONS - 2.2 TT50H/ TT100H Laney POWER TO THE MUSIC MODERN ALL TUBE GUITAR HEAD AMPLIFIER w w w. l a n e y. c o .
TT50H/TT100H IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product 2. The product should be powered by a three pin `grounded (or earthed) plug connected to a power socket with a grounded earth outlet. 3. All safety and operating instructions should be retained for future reference 4.
TT50H/ TT100H Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’ within the products enclosure that may be sufficient to constitute a risk of electrical shock to persons. Este simbolo tiene el proposito de alertar al usuario de la presencia de ‘(voltaje) peligroso’ que no tiene aislamiento dentro de la caja del producto que puede tener una magnitud suficiente como para constituir riesgo de corrientazo.
TT50H/TT100H Laney OPERATING INSTRUCTIONS BEFORE SWITCHING ON After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into the power supply ensure you are connecting to a grounded earth outlet. If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where the amplifier is to be used is strictly conformed to.
TT50H/ TT100H Laney OPERATING INSTRUCTIONS Dear Player, Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney family. Each and every Laney unit is designed and built with the utmost attention to care and detail, so I trust yours will give you many years of enjoyment. Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in my parent’s garage.
TT50H/TT100H Laney 30 29 28 OPERATING INSTRUCTIONS 27 26 1 PRESENCE 0 MAINS FX MIX 25 24 AMP DAMPING MUTE TIGHT REVERB STANDBY 3 TT100H VOLUME 2 VOLUME 1 2 8 7 REVERB TREBLE 6 5 8 7 6 5 8 MIDDLE BASS REVERB TREBLE MIDDLE BASS REVERB BOOST BRIGHT 7 6 TREBLE MIDDLE BRIGHT 23 22 21 14 9 2 FRONT PANEL CONTROLS 3 XPAND MODERN DRIVE MASTER 16 20 19 18 17 15 2 MODERN DRIVE MASTER 11 12 13 BASS INPUT 1 CHANNEL 5 10 1 BRIGHT VOLUME 3 4 1 INPUT: Sin
Laney OPERATING INSTRUCTIONS FRONT PANEL CONTROLS - continued for more information on midi see the midi section later in the manual. DRIVE: Sets the level of tube preamplifier gain or how dirty your sound is for the drive channel - Channel 2.
Laney OPERATING INSTRUCTIONS FRONT PANEL CONTROLS - continued BRIGHT: Adds edge and picking emphasise to you sound. This control has more effect at lower drive (10) settings. MODERN: The modern switch applies a degree of compression to the signal, providing massive smooth sustain. XPAND: At high gain and volume settings the natural tendancy for a tube amplifier is to compress, this has the effect of limiting the dynamic range of the note.
TT50H/TT100H Laney OPERATING INSTRUCTIONS FRONT PANEL CONTROLS - continued pre-amplifier, so sends to the fx loops and record out are maintained allowing signal levels to be monitored silently and allow silent recording via the record out. REVERB: Sets the overall master level of the reverb. Use in conjunction with the individual channel reverb send level controls. FX MIX: Determines the level of signal returned from the FX return socket.
TT50H/TT100H Laney 39 38 OPERATING INSTRUCTIONS 37 45 44 43 42 35 40 41 34 36 33 31 32 REAR PANEL CONTROLS POWER INLET SOCKET: Connect to your power source. Make sure the specified voltage is correct for your country! POWER FUSE: This is the main safety fuse for the unit. The fuse protects the AC power to the amplifier. USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL.
TT50H/TT100H Laney OPERATING INSTRUCTIONS REAR PANEL CONTROLS - CONTINUED will result in masmatched impedance and will reduce the amplifiers performance and in some cases may cause damage to the amplifier.You may connect 1*4ohm, 1*8ohm, 2*8ohm, 2*16ohm cabinets to these sockets. Do not use at the same time as the 16 ohm socket. 16 OHM SOCKET: Use to connect a single 16 ohm cabinet. Do not use at the same time as the 4-8 ohm sockets.
TT50H/TT100H Laney OPERATING INSTRUCTIONS REAR PANEL CONTROLS - MIDI SECTION 45 44 43 42 41 The advantage of having midi in your guitar amplifier is that it allows your amplifier and external devices (like FX controllers) to talk with each other. At last you can press one button to select the amplifier channel, and choice of effects on multiple devices all at once.
Laney OPERATING INSTRUCTIONS REAR PANEL CONTROLS - continued phantom power* Connect to the midi in of the next external midi equipped device in the chain if required. MIDI IN: The TT amplifier receives midi information here from external midi devices such as foot controllers or midi sequencers allowing the status of the amplifer to be switched via midi. It is a 7 pin DIN socket supporting phantom power* Connect to the midi out of an external midi equipped device.
OPERATING INSTRUCTIONS MIDI APPLICATIONS NOTE 2: TT AMPLIFIER AND MIDI CONTROLLER In this configuration the TT amplifier is a slave device ,its setting being called up by the midi controller. This midi controller could be a device which purely generates midi information or a multi effects pedal board. To setup the amplifier you need to do the following:1. Select the required patch on your pedal board/midi controller 2. Select the Channel/Volume/Reverb switch setting on your TT amp. 3.
TT50H/TT100H Laney OPERATING INSTRUCTIONS QUICK START SETTINGS - suggestions only! Experiment Crystal Clean Blues Clean Blues Lead Page 15/24
TT50H/TT100H Laney OPERATING INSTRUCTIONS QUICK START SETTINGS - continued Rock Rhythm Rock Lead Metal Page 16 /24
TT50H/TT100H Laney OPERATING INSTRUCTIONS USER SETTINGS - Storte your own cool sounds here Page 17/24
TT50H/TT100H Laney OPERATING INSTRUCTIONS TUBE AMPLIFIER SURVIVAL TIPS Tube amplifiers generally sound much warmer/sweeter than solid state transistor amplifiers but they also need a little more respect due to the fragile glass tubes themselves.
TT50H/TT100H Laney OPERATING INSTRUCTIONS TUBE AMPLIFIER SURVIVAL TIPS - continued V6 V8 V5 V3 V7 V8 V7 V6 V4 V2 V5 V3 V1 TT50H Tube Layout TT100H Tube Layout V4 V10 EL34B Grade Number V1 V2 V3 V4 V5 V6 V7-10 V2 V1 V9 ECC83 ECC83 ECC83 ECC83 ECC83 ECC83 EL34B-STR (High Grade) (High Grade) (Standard) (Standard) (Standard) (Standard) 1st Gain Stage Channel 1 1st Gain Stage Channel 2 2nd Gain Stage Channel 2 1st Gain Stage Channel 3 2nd Gain Stage Channel 3 Power Driver Stage Output T
TT50H/TT100H Laney OPERATING INSTRUCTIONS TT SAMPLE SYSTEM 1 Input FX Controller Output Laney Power To The Music RB115 TT412A Model Power Rating 300W Program Serial Number: SAMPLE DESIGNED IN THE UK BY LANEY www.laney.co.uk Input Link 8 Ohms 16 Ohms General Notes Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your equipment.
TT50H/TT100H Laney OPERATING INSTRUCTIONS Midi Out TT SAMPLE SYSTEM 2 Input FX Controller Output Further Sound Reinforcement Laney Power To The Music RB115 TT412A Model Power Rating 300W Program Serial Number: SAMPLE DESIGNED IN THE UK BY LANEY Input Link 8 Ohms 16 Ohms Input Link 8 Ohms 16 Ohms www.laney.co.uk Laney Power To The Music RB115 TT412A Model Power Rating 300W Program Serial Number: SAMPLE DESIGNED IN THE UK BY LANEY www.laney.co.
TT50H/TT100H Laney OPERATING INSTRUCTIONS BLOCK DIAGRAM RECORD OUT CHANNEL1 EQ FX SEND CHANNEL2 INPUT DRIVE EQ FX RETURN MASTER VOLUME 1 OUTPUT STAGE FX MIX MASTER VOLUME CHANNEL SWITCHING MASTER VOLUME 2 CHANNEL3 DRIVE MUTE VOLUME/ BRIGHT EQ LINE OUT MASTER VOLUME REVERB RETURN PRESENCE MASTER REVERB NOTE: This product conforms to the requirements of the following European Regulations, Directives & Rules:CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (93/68/EEC), RoHS (EU2002/95/EC
VH1000 0RH TT50H/TT1 Laney OPERATING INSTRUCTIONS SPECIFICATIONS Supply Voltage Mains Fuse TT50H Mains Fuse TT100H HT Fuse Power Consumption Output Power Rating Loudspeaker Options Features ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option (~220V>240V = T2A L 250V) (~100>120V = T5A L 250V) (~220V>240V = T3.15A L 250V) (~100>120V = T6.
Laney POWER TO THE MUSIC METAL JAZZ BLUES ROCK AMPICONS ARE HERE TO HELP! LANEY AMPLIFICATION w w w. l a n e y. c o . u k In the interest of continued product development, Laney Reserves the right to amend product specification without prior notification.
