Installation & Assembly

STEP 2:
Carefully turn over the chaise.
Ax8 Bx8 Cx8 Dx1 Ex1 Fx4
Phillips Head Screwdriver
( not included) Hardware & Tool required
1
2
Please put the Left Loveseat Body (1) upside down on a carpeted or padded area by two adults to make fully visible the corners.
Open the Zipper on the bottom of Left Loveseat Body (1) as shown.
Take out the 4pcs Legs (2) and hardware package on bottom of the Left Loveseat Body (1).
Position one of Legs (2) at one of the four wooden corners.
Insert 2 pieces of each Spring Washer (B), Flat Washer (C) into 2 pieces of Bolt (A) as shown.
Then insert assembled 2 pieces of Bolts (A) into the corner to connect the Leg(2).
Use Allen Wrench (D) to tighten all of Bolts (A).
Repeat the same steps for the remaining three legs (2).
Secure 1pc Clip (E) to the Bottom of Left Loveseat Body (3) by using 4pcs Screw (F).
Tighten all Screws (F) with a Phillips Head Screwdriver (not included).
4pcs Legs
+
Hardware Package
2
Zipper on the bottom
of Loveseat body
2
2
C
A
D
B
2
3
2
2
2
F
E
2
STEP 3:
ARM SECTIONAL SOFA
Page 3 of 4