- Lainer Printer Operator Guide

Settings You Can Change with the User Tools

❖

❖❖

❖ The paper types you can set for tray 2 are as follows:

• Plain paper, Recycled paper, Special paper, Color paper, Letterhead,

OHP, Label paper, Thick Paper, Thin paper

Note

❒ Default:

• Paper Type: No display

• Copying Method: 2 Sided Copy

• Apply Auto Paper Select: Yes

❒ A key mark is displayed next to the paper tray if No is selected.

Limitation

❒ Auto paper select can only be selected for the Copy function if No display

and Recycled paper are selected. However, auto paper select is not used if

No is selected.

Paper Size Settings

❖

❖❖

❖ Paper Type (LCT)

Sets the display so you can see what type of paper is loaded in the large ca-

pacity tray.

❖

❖❖

❖ The paper types you can set for LCT are as follows:

• Plain paper, Recycled paper, Special paper, Color paper, Letterhead

Note

❒ Default

• Paper Type: No display

• Copying Method in Duplex: 2 Sided Copy

• Apply Auto Paper Select: Yes

❒ A key mark is displayed next to the paper tray if No is selected.

Limitation

❒ Auto paper select is only selected for the Copy function if No display and

Recycled paper are selected. However, auto paper select is not used if No

is selected.

RussianC2-EN-sysF1_V4_FM.book Page 75 Thursday, August 23, 2001 11:34 AM