Printer User Manual

Troubleshooting
76
4
C
Angling the waste toner bottle as
shown in the illustration, pull it
out of waste toner bottle holder.
D
Remove the sticker from the side
of the new waste toner bottle and
use it to seal the old waste toner
bottle.
E
Insert the new waste toner bottle
into the waste toner bottle holder,
and return the holder to its origi-
nal position.
F
Close the front cover. Press the
center of the front cover until it
locks into place.
G
Turn on the printer's power switch.
Replacing the Fuser Cleaner
Replace the fuser cleaner whenever
the following message appears on the
panel display.
IPDL-C
Chg. Cleaner
Change Fuser
Cleaner
R
CAUTION:
A
Slide the top cover open lever to-
wards the front of the printer, and
open the top cover.
Note
❒ If the printer is equipped with
the paper feed unit (optional)
and the duplex unit (optional),
first open the upper portion of
the duplex unit, and then open
the top cover of the printer.
ZDGH200J
ZDGH210J
ZDGH201J
• When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
ZDGH100J