Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Making Printer Settings with the Control Panel
106
6
Paper Input Menu
There are five menu items in the “Paper Input” menu.
• Bypass size
• Tray Paper Size
• Paper type
• Tray Locking
• Tray Priority
Reference
For more information about loading paper in the tray, see p.37 “Loading Pa-
per and Other Media”.
Paper Input Parameters
Menu Description
Bypass Size The paper size for the Bypass Tray.
For more information about paper sizes that can be set in the By-
pass Tray, see p.25 “Paper and Other Media Supported by This
Printer”.
Tray Paper Size The paper size for each tray.
When you select sizes that are not indicated on the paper size dial
of Tray 1, Tray 2 or Tray 3, you should set the dial to “p” and
then select the paper size here.
❖
❖❖
❖ Tray 1
For more information about paper sizes that can be set in the
Tray 1, see p.25 “Paper and Other Media Supported by This
Printer”.
❖
❖❖
❖ Tray 2
For more information about paper sizes that can be set in the
Tray 2, see p.25 “Paper and Other Media Supported by This
Printer”.
❖
❖❖
❖ Tray 3
For more information about paper sizes that can be set in the
Tray 3, see p.25 “Paper and Other Media Supported by This
Printer”.
Note
❒ Only the installed trays appear on the panel display.