Printer User Manual

System Menu
127
6
Edge Smoothing You can set whether Edge Smoothing is enabled. When it is on,
jagged lines appear more smoothly. Set it to off when the print im-
age contains fine gradation in tone.
• On
• Off
Note
❒ Default: On
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
Resolution You can set the print resolution in dots per inch.
❖
❖❖
❖ PCL
300 dpi, 600 dpi
❖
❖❖
❖ PS
300 dpi, 600 dpi, 1200 dpi
❖
❖❖
❖ TIFF
200 dpi, 300 dpi, 400 dpi, 600 dpi, 1200 dpi
Note
❒ Default: 600 dpi
Toner Saving You can select whether or not Toner Saving is enabled.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
Spool Printing You can select whether all of the print data is spooled to the Hard
Disk Drive before printing.
• On
• Off
Note
❒ Default: Off
❒ Spooling stores the print job sent by a computer temporarily in
the printer, transfers the print job, and then prints it.
❒ This menu appears only when the optional Hard Disk Drive is
installed.
Menu Description