Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Making Printer Settings with the Control Panel
130
6
Host Interface Menu
There are six menu items in the “Host Interface” menu.
• I/O Buffer
• I/O Timeout
• Network Setup
• IEEE 1394 Setup
• IEEE 802.11b
• USB Setting
Host Interface Parameters
Menu Description
I/O Buffer You can set the size of the I/O Buffer. Normally it is not necessary
to change this setting.
16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB
Note
❒ Default: 128 KB
I/O Timeout You can set how many seconds the printer waits before ending a
print job if more data is not received when using parallel interface
and USB. If data from another port often appears in the middle of
a print job, you should increase the timeout value.
10 seconds, 15 seconds, 20 seconds, 25 seconds, 60 seconds
Note
❒ Default: 15 seconds