Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Host Interface Menu
131
6
Network Setup
Note
❒ Items only appear in the Network Setup when the related op-
tions are installed. "IEEE 1394 Setup" appears only when the
optional IEEE 1394 board is installed. "IEEE 802.11b" appears
only when the optional IEEE 802.11b board is installed.
Reference
For more information about the "Network Setup", see "Config-
uring the Printer for the Network" in the Setup Guide.
For more information about the "IEEE 1394 Setup", see "Con-
figuring the Printer for the Network" in the Setup Guide.
For more information about the "IEEE 802.11b", see "Configur-
ing the Printer for the Network" in the Setup Guide.
❖
❖❖
❖ IP Address
You can set the IP Address.
Note
❒ Default: 011.022.033.044
❖
❖❖
❖ Subnet Mask
You can set the Subnet Mask.
Note
❒ Default: All zero
❖
❖❖
❖ Gateway Address
You can set the Gateway Address.
Note
❒ Default: All zero
Menu Description