Printer User Manual

Making Printer Settings with the Control Panel
134
6
*1
Appears only when the 1394 Interface Unit board is installed.
*2
Appears only when the 802.11b Interface Unit board is installed.
*3
While the printer is Online, press {
{{
{Enter #}
}}
}, and then press {
{{
{Escape}
}}
}. Finally, press
{
{{
{Menu}
}}
} . You can access the "USB Setting" menu on the panel display.
IEEE 802.11b
*2
You can make settings for using the wireless LAN. This menu ap-
pears only when the optional IEEE 802.11b board is installed.
❖
❖❖
❖ Comm.Mode
You can set the transmission mode for IEEE 802.11b.
Note
❒ Default: Ad hoc
❖
❖❖
❖ Channel
The selectable channels are 1-11 (Inch version) and 1-13 (Met-
ric version).
Note
❒ Default: 11
❖
❖❖
❖ Trans. Speed
You can set the transmission speed for IEEE 802.11b.
Note
❒ Default: Auto
❖
❖❖
❖ WEP Settings
You can set the code for IEEE 802.11b.
Note
❒ Default: Not Active
❒ You need to set the WEP code key from the network before
making this setting. Without the key, transmission cannot
be performed.
❒ Be sure to set the key before setting the code to "Active".
USB Setting
*3
You can set the transmission speed for USB.
Note
❒ Default: Auto
Menu Description