Printer User Manual

Appendix
162
7
Memory Unit TypeB 64MB
❖
❖❖
❖ Module Type:
SO-DIMM (Small Outline Dual-in-line Memory Module)
❖
❖❖
❖ Memory Type:
SDRAM (Synchronous Dynamic RAM)
❖
❖❖
❖ Number of Pins:
144 pins
Network Interface Board Type 2610
❖
❖❖
❖ Topology:
Ethernet (10BaseT/100BaseTX)
❖
❖❖
❖ Protocols:
TCP/IP, NetBEUI, IPX/SPX, AppleTalk
❖
❖❖
❖ Interface Connector:
RJ45
❖
❖❖
❖ Required Cable:
STP (Shielded Twisted-Pair) cable
Category / Type5 or better
1394 Interface Unit Type 4510
❖
❖❖
❖ Transmission Spec.:
IEEE 1394
❖
❖❖
❖ Device Class:
SCSI print, IP over 1394
❖
❖❖
❖ Interface Connector:
IEEE 1394 (6 pins × 2)
❖
❖❖
❖ Required cable:
1394 interface cable (6 pins x 4 pins, 6 pins x 6 pins)
Important
❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.
❖
❖❖
❖ Connectable number of device in a bus:
Maximum 63