Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Troubleshooting
72
5
Replace Maintenance Kit It is time to replace parts in-
cluded in the Maintenance
Kit.
Replace parts. See p.144
“MAINTENANCE KIT Type
2600”.
Shift Tray Error An error has occurred in the 1-
bin Shift Sort Tray.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Size Media Mismatch The paper size setting of the
tray differs from that of actual
paper type in the tray.
Load paper of the indicated
paper size and type into the
paper tray being used. See
p.25 “Paper and Other Media
Supported by This Printer”.
Size Mismatch The paper size setting of the
tray differs from that of actual
paper type in the tray.
Load paper of the indicated
paper size and type into the
paper tray being used. See
p.25 “Paper and Other Media
Supported by This Printer”.
USB I/F Error An error has occurred in the
USB interface.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Warming Up/Adjusting... The printer is warming up or
toner is being supplied.
Wait until the panel display
change the "Ready".
Messages Description Comments