Digital Printer Operator Guide

Paper and Other Media Supported by This Printer
19
3
•
❍
means that the size is supported and should be selected the paper size us-
ing the operation panel. (The bypass tray and PS420 has no dial on the tray.)
•
✩
means that the size is supported and indicated on the tray dial. Be sure to
set the paper size dial to match the actual paper size loaded in the tray.
•
★
means that the size is supported but not indicated on the tray dial. You
should set the tray dial to “p”, and select the paper size using the operation
panel.
•
❍
* means that the supported size is approximately 90 – 297 mm in width, and
approximately 148 – 432 mm in length. The supported size may differ de-
pending on the printer language you use. Use the printer driver to specify the
custom size. Set the custom size setting with the operation panel.
• X means that the size is not supported.
Custom Size
(PCL 6/PS only)
 XX X❍*
8K 267 × 390 ★★X ❍
16K 195 × 267 ★★X ❍
267 × 195 ★★X ❍
Size (mm) Standard Tray (tray 1) PS440 (1000–sheet paper feed unit) Standard Tray (tray 2) PS420 (2000–sheet paper feed unit) Bypass Tray Type 270