Digital Printer Operator Guide

Paper and Other Media

• Load only one size and type of envelope at a time.

• Before loading envelopes, flatten the leading edges (sides being fed into

the printer) of them by running a pencil or ruler across them.

• Some kinds of envelopes might cause misfeeds, wrinkles or poor printing.

• Before loading envelopes, confirm that they are rectangular in shape. See

the following illustrations.

• Avoid using the non-supported envelopes listed on P.28 “Paper not sup-

ported by this printer”.

Paper not supported by this printer

Avoid using the following types of paper that are not supported by this printer:

• Paper whose weight is heavier or lighter than the limitations.

⇒

P.17 “Paper

Types and Sizes”

• Bent, folded, or creased paper

• Curled or twisted paper

• Torn paper

• Wrinkled paper

• Damp paper

• Paper stuck together

• Paper that is dry enough to emit static electricity

• Paper that has already been printed into, except a preprinted letterhead

Note

❒ Ink on paper from an earlier print job, another copier, an ink-jet printer or

other devices could damage the fusing unit of this printer due to different

fusing temperatures.

Good construction for envelopes

Poor construction for envelopes

Good construction for envelopes

Poor construction for envelopes

TS3X020E

TS3X010E