Digital Printer Operator Guide

Loading Paper and Other Media
35
3
Loading Paper in PS420
(Paper Feed Unit)
This section describes instructions to
load paper in the optional paper feed
unit PS420. You can load A4 long-edge
feed (Metric version) or 8
1
/
2
" × 11"
long-edge feed (Inch version) size into
PS420.
Note
❒ Load paper of the same size in the
right and left sides of the paper
feed unit.
A
Slide the paper tray out until it
stops.
B
Load the paper completely into
the tray.
Important
❒ Align the paper so that the left
stack is flush with the left side,
and the right stack is flush with
the right side.
❒ Do not stack paper over the lim-
it mark.
❒ Confirm that the end fence (A)
locks completely after loading
the right stack.
❒ If you want to change the paper
size, contact your sales or ser-
vice representative.
Note
❒ To avoid paper multi-feeds,
shuffle sheets before setting
them in the tray.
❒ Load the paper face up into the
tray.
C
Slide the tray into the printer un-
til it stops.
ZAEY200E
ZAEY201E