Operator’s Guide LD 035/LD 045 Copy Reference you r do cu me nt m an a geme nt p ar t n er
Copy Reference AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine.
AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. For safe and correct use of this machine, please be sure to read the Safety Information in the General Settings Guide before you use it.
AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. For safe and correct use of this machine, please be sure to read the Safety Information in the General Settings Guide before you use it.
AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM Declaration of Conformity “The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives.” In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Trademark Acrobat® is a registered trademark of Adobe Systems Incorporated.
AdonisC3copy_gb_Cover2-5 Page 1 Friday, January 24, 2003 1:26 PM Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. For safe and correct use of this machine, please be sure to read the Safety Information in the General Settings Guide before you use it.
AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM Declaration of Conformity “The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives.” In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Trademark Acrobat® is a registered trademark of Adobe Systems Incorporated.
AdonisC3_GBcopyF_FM1.book Page i Thursday, November 28, 2002 1:53 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file.
AdonisC3_GBcopyF_FM1.book Page ii Thursday, November 28, 2002 1:53 PM ❖ Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". • DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder V2 Lite in detail. This guide can be displayed from the [Setup] dialog box when DeskTopBinder V2 Lite is installed.
AdonisC3_GBcopyF_FM1.book Page iii Thursday, November 28, 2002 1:53 PM What You Can Do with This Machine Types of Duplex Copies 1-sided 2 Pages 2-sided 1 Page (see p.43 " 1 Sided 2 Sided") 2-sided 1 Page 2-sided 1 Page (see p.43 " 2 Sided 2 Sided") 1-sided 4 Pages 2-sided 1 Page (see p.47 " 1 Sided 4 Pages Combine 2 Side") 2-sided 2 Pages 2-sided 1 Page (see p.47 " 2 Sided 4 Pages Combine 2 Side") 1-sided 8 Pages 2-sided 1 Page (see p.
AdonisC3_GBcopyF_FM1.book Page iv Thursday, November 28, 2002 1:53 PM Copying Book Originals 1-sided 4 Pages Booklet (see p.50 " 1 Sided Booklet") Open to Left 1 2 3 2 3 3 1 4 4 1 Open to Right 1 2 3 3 3 2 4 1 1 4 2-sided 2 Pages Booklet (see p.51 " 2 Sided Booklet") Open to Left 3 1 Open to Right 3 1 1-sided Magazine (see p.51 " 1 Sided Magazine") Open to Left 1 2 5 2 7 8 7 1 4 8 1 3 5 3 6 Open to Right 1 2 5 7 7 2-sided 8 2 8 1 5 3 1 4 6 Magazine (see p.
AdonisC3_GBcopyF_FM1.book Page v Thursday, November 28, 2002 1:53 PM Combining Multiple Pages onto a Single Page (see p.45 " One-Sided Combine") 1-sided 2 Pages 1-sided 1 Page 2-sided 1 Page 1-sided 4 Pages 1-sided 1 Page 2-sided 2 Pages 1-sided 1 Page 1-sided 8 Pages 1-sided 1 Page 2-sided 4 Pages 1-sided 1 Page Copying Originals Such as Books (see p.
AdonisC3_GBcopyF_FM1.book Page vi Thursday, November 28, 2002 1:53 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine.................................................................. iii How to Read This Manual .....................................................................................1 Machine Types ................................................................................
AdonisC3_GBcopyF_FM1.book Page vii Thursday, November 28, 2002 1:53 PM Positive/Negative ..................................................................................................... 55 Erase........................................................................................................................ 56 Margin Adjustment ................................................................................................... 58 Background Numbering ..............................................
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 1 Thursday, November 28, 2002 1:53 PM How to Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section in the General Settings Guide.
AdonisC3_GBcopyF_FM1.book Page 2 Thursday, November 28, 2002 1:53 PM Machine Types This machine comes in two models which vary by copy speed. To make sure which model you have, see the inside front cover of this manual.
AdonisC3_GBcopyF_FM1.book Page 3 Thursday, November 28, 2002 1:53 PM Functions that Require Options Booklet finisher *1 *1 ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ Punch Auto Document Feeder Mixed Size mode ❍ Saddle Stitch SADF ❍ Staple 1000-Sheet finisher 2 Tray finisher *1 *1 Shift Stack Options Auto Document Feeder (ADF) Batch mode Functions Shift Sort The available functions depend on your machine configuration and which options you have. See the table below.
AdonisC3_GBcopyF_FM1.book Page 4 Thursday, November 28, 2002 1:53 PM Control Panel Note ❒ This illustration shows the control panel of the machine with options fully installed. 1. Screen Contrast knob 5. {Check Modes}} key Adjusts the brightness of the display panel. Press to check the entered copy job settings. 2. Indicators 6. {Program}} key These indicators show the status of the machine or indicate errors.
AdonisC3_GBcopyF_FM1.book Page 5 Thursday, November 28, 2002 1:53 PM 11. Operation switch Press this switch to turn the power on (the On indicator goes on). To turn the power off, press this switch again (the On indicator goes off). 12. {Sample Copy}} key Use this key to make a single sample copy before starting a long copy run. By checking the sample copy and making any necessary changes to the image quality settings before you make multiple copies, you can save time and paper. See p.33 “Sample copy”.
AdonisC3_GBcopyF_FM1.book Page 6 Thursday, November 28, 2002 1:53 PM Display Panel Note ❒ The following illustrations are examples for the machine with the optional 2 Tray finisher and large capacity tray (LCT) installed. ❖ Initial copy display 1. Original mode, Image Density and Special Original mode. 2. Operational status or messages. 3. You can register up to three frequently used reduce/enlarge ratios other than the fixed reduce/enlarge ratios. See p.94 “Shortcut R/E”. 4.
AdonisC3_GBcopyF_FM1.book Page 7 Thursday, November 28, 2002 1:53 PM 1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 9 Thursday, November 28, 2002 1:53 PM Originals ❖ Exposure glass Reference position A3 Horizontal size Vertical size 1 Maximum Scanning area A3 (297x420mm) 11"x17" (279x432mm) A4 A3 CP01AEE ❖ Auto Document Feeder Note ❒ When you copy custom size originals, make sure you specify the size of the originals. If not, the image may not be copied properly. See p.14 “Placing custom size originals”.
AdonisC3_GBcopyF_FM1.book Page 10 Thursday, November 28, 2002 1:53 PM Placing Originals Placing Originals Note ❒ Place originals after correction fluid and ink have completely dried. Not taking this precaution could dirty the exposure glass with marks that will be copied. 1 For example, to copy A3Kor 11" × 17"K originals with the Staple function selected: Reference For original sizes you can set, see p.7 “Originals” . Original Orientation You can set the original orientation in the following ways.
AdonisC3_GBcopyF_FM1.book Page 11 Thursday, November 28, 2002 1:53 PM Placing Originals B Select the original orientation. Standard orientation A Make sure that ed. is select- Placing Originals on the Exposure Glass A Lift 1 the exposure glass cover or the ADF. Important ❒ Do not lift the exposure glass cover or the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. 90° turn A Place your original in the landscape orientation, and then press .
AdonisC3_GBcopyF_FM1.book Page 12 Thursday, November 28, 2002 1:53 PM Placing Originals Placing Originals in the Auto Document Feeder 1 Settings should be made in the following situations: A Set the document guide to the original size. B Align the edges of the original and place it on the ADF with the side to be copied facing up. ❖ When placing originals one by one: p.13 “SADF mode” ❖ When placing originals consisting of more than 80 pages: p.
AdonisC3_GBcopyF_FM1.book Page 13 Thursday, November 28, 2002 1:53 PM Placing Originals B Select [Batch], and then press [OK]. Note ❒ When [Batch] is not displayed, change the settings. See p.101 “Switch to Batch (SADF)”. C Place the first part of the original, and then press the {Start} } key. D After the first part of the original has been fed, place the next part. E When the Sort, Combine or 1 Sided → 2 Sided mode has been set, press the {#} } key after all originals have been scanned.
AdonisC3_GBcopyF_FM1.book Page 14 Thursday, November 28, 2002 1:53 PM Placing Originals A Press [Special Original]. A Press [Special Original]. B Press [Mixed Size], and then press B Press [Custm Size Origi.]. C Enter the horizontal size 1 [OK]. C Align the rear and left edges of the originals as shown. 1 Note ❒ If you make a mistake, press [Clear] or the {Clear/Stop} } key, and then enter the value again. B4 A3 2 CP19AE 1. Place into the ADF 2.
AdonisC3_GBcopyF_FM1.book Page 15 Thursday, November 28, 2002 1:53 PM 2. Copying Basic Procedure A When the machine is set for user codes, enter a user code (up to 8 digits) with the number keys, and then press the {#} } key. The machine is ready to copy. Reference For users codes, see “Key Operator Tools”, General Settings Guide. B Make sure that "d dReady" is shown on the display. If any other function is displayed, press the {Copy} } key. ❖ Initial copy display E Set your desired settings.
AdonisC3_GBcopyF_FM1.book Page 16 Thursday, November 28, 2002 1:53 PM Copying Interrupt Copy Use this function if you want to interrupt a long copy job to make urgently needed copies. Limitation ❒ You cannot use the Interrupt Copy function when fax originals are being scanned or the scanner function is being used. 2 A Press the {Interrupt}} key. The Interrupt indicator goes on. When the originals stop scanning A Remove the originals that were being copied and place the originals you want to copy.
AdonisC3_GBcopyF_FM1.book Page 17 Thursday, November 28, 2002 1:53 PM Basic Procedure Job Preset You can set up the next copy content during copying. If a long copy job is in progress and you do not want to wait for it to finish, you can use this function to set up the next copy job in advance. When the current copy job is finished, the next job will start automatically. 2 A Press [Next Job] when "Copying" is shown. B Set up the next copy job.
AdonisC3_GBcopyF_FM1.book Page 18 Thursday, November 28, 2002 1:53 PM Copying Copying from the Bypass Tray Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, postcards and copy paper that cannot be loaded in the paper trays. 2 Preparation When the duplex unit is attached, the default is [1 Sided → 2 Sided]. When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series] (for example [1 Sided → 1 Sided] or [2 Sided → 1 Sided] ).
AdonisC3_GBcopyF_FM1.book Page 19 Thursday, November 28, 2002 1:53 PM Copying from the Bypass Tray Note ❒ If the guides are not flush with the copy paper, images might be skewed or paper misfeeds might occur. ❒ Do not stack paper over the limit m a rk , o t h e rw is e i m a g e s might be skewed or paper misfeeds might occur. ❒ Swing out the extender to support paper sizes larger than A4L, 81/2" × 11"L. ❒ Fan paper to get air between the sheets and avoid a multi-sheet feed.
AdonisC3_GBcopyF_FM1.book Page 20 Thursday, November 28, 2002 1:53 PM Copying D Place your originals, and then press the {Start} } key. Note ❒ When copying onto OHP transparencies, remove copied sheets one by one. E When your copy job is finished, 2 press the { Clear Modes} } key to clear the settings.
AdonisC3_GBcopyF_FM1.book Page 21 Thursday, November 28, 2002 1:53 PM Copier Functions Copier Functions Adjusting Image Density There are three types of adjustment available: ❖ Auto Image Density The machine automatically adjusts image density. Manual image density A Press [Auto Image Density] to cancel it. 2 B Press [Lighter] or [Darker] to adjust the image density. ❖ Manual image density You can adjust the density of the overall original in seven increments.
AdonisC3_GBcopyF_FM1.book Page 22 Thursday, November 28, 2002 1:53 PM Copying Selecting Original Type Setting A Press the appropriate key to select the original type. Select one of the following six types to match your originals: ❖ Text Select this mode when your originals contain only text (no pictures). 2 ❖ Text/Photo Select [Text/Photo] when your originals contain photographs or pictures with text. ❖ Photo Delicate tones of photographs and pictures can be reproduced with this mode.
AdonisC3_GBcopyF_FM1.book Page 23 Thursday, November 28, 2002 1:53 PM Copier Functions Selecting Copy Paper There are two ways to select copy paper: ❖ Auto Paper Select The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio. 2 ❖ Manual Paper Select Choose the tray containing the paper you want to copy onto: a paper tray, bypass tray or Large Capacity Tray (LCT). Reference p.9 “Sizes difficult to detect” p.
AdonisC3_GBcopyF_FM1.book Page 24 Thursday, November 28, 2002 1:53 PM Copying Auto Paper Select A Make sure that [Auto Paper Select] is selected. 2 Note ❒ Trays with a key mark will not be automatically selected. See “Paper Type”in “Tray Paper Settings", General Settings Guide. Manual Paper Select A Select the paper tray, bypass tray or the LCT. The indicator corresponding to the selected paper tray is highlighted. Reference p.
AdonisC3_GBcopyF_FM1.book Page 25 Thursday, November 28, 2002 1:53 PM Copier Functions - Rotated copy If the orientation in which your original is placed (L or K) is different from that of the paper you are copying onto, this function rotates the original image by 90° to fit it on the copy paper. This function works when Auto Paper Select or Auto Reduce/Enlarge is selected. See p.23 “Auto Paper Select”.
AdonisC3_GBcopyF_FM1.book Page 26 Thursday, November 28, 2002 1:53 PM Copying Preset Reduce/Enlarge A Press [Reduce/Enlarge]. You can select a preset ratio for copying. 2 ❖ Base Point The base point of Reduce/Enlarge differs depending on how the original is scanned. When the original is placed on the exposure glass, the upper left corner will be the base point. When it is placed in the ADF, the bottom left corner will be the base point.
AdonisC3_GBcopyF_FM1.book Page 27 Thursday, November 28, 2002 1:53 PM Copier Functions A Press [Create Margin] displayed on the initial display. B Enter the ratio. To select the ratio with [n n] and [o o] A Select a preset ratio close to the desired ratio by using [Reduce] or [Enlarge]. B Adjust the ratio with [n n] or [o o]. B If you do not want to combine it with the Reduce/Enlarge function, place your originals, and then press the {Start} } key.
AdonisC3_GBcopyF_FM1.book Page 28 Thursday, November 28, 2002 1:53 PM Copying Auto Reduce/Enlarge A Press [Auto Reduce/Enlarge]. The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. 2 B Select the paper tray. C Place the original, and then press the {Start} } key. Note ❒ You cannot use the bypass tray with this function.
AdonisC3_GBcopyF_FM1.book Page 29 Thursday, November 28, 2002 1:53 PM Copier Functions B Press [Specifd. Ratio]. C Make sure that [Specifd. Ratio] Directional Magnification (%) is highlighted. D Enter the length of the original with the number keys, and then press the [#] key. Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically. a% Note ❒ You can enter sizes within the following ranges: 2 b% Metric 1–999 mm (in increments of version 1 mm) Inch 0.1"–99.
AdonisC3_GBcopyF_FM1.book Page 30 Thursday, November 28, 2002 1:53 PM Copying D Enter the desired ratio with the number keys, followed by [#]. E Press [OK]. To specify a ratio with [n n] and [o o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n n] or [o o]. 2 Note ❒ Pressing [n n] or [o o] changes the ratio in increments of 1%. Pressing and holding down [n n] or [o o] changes it in increments of 10%.
AdonisC3_GBcopyF_FM1.book Page 31 Thursday, November 28, 2002 1:53 PM Copier Functions A Press [Reduce/Enlarge]. Sort The machine can scan originals into memory and automatically sort copies. Reference Related initial settings B Press [Specifd. Ratio]. C Press [Dir. Size Mag mm]. D Enter the horizontal size of the original with the number keys, and then press [#]. E Enter the horizontal size of the copy with the number keys, and then press [#]. 2 p.102 “Select Stack Function” p.
AdonisC3_GBcopyF_FM1.book Page 32 Thursday, November 28, 2002 1:53 PM Copying ❖ Shift Sort • 1000-Sheet finisher (optional) Each time the copies of one set or those of each job are delivered, the next copy is shifted when delivered so you can separate each set or job. • 2 Tray finisher (optional) The shift tray moves backward or forward each time the copies of one set or those of each job are delivered, causing the next copy to shift when delivered so that you can differentiate each set or job.
AdonisC3_GBcopyF_FM1.book Page 33 Thursday, November 28, 2002 1:53 PM Copier Functions B Enter the number of copy sets with the number keys. B Press the {Sample Copy}} key. Note ❒ To confirm the type of finishing, press the {Sample Copy} } key. See p.33 “Sample copy”. C Place your originals. Note ❒ When placing an original on the exposure glass, start with the first page to be copied. When placing an original in the ADF, set so the first page is on the top.
AdonisC3_GBcopyF_FM1.book Page 34 Thursday, November 28, 2002 1:53 PM Copying Changing the number of sets Stack You can change the number of copy sets during copying. Copies can be assembled with each page placed. • 1000-Sheet finisher (optional) Each time the copies of one set or those of each job are delivered, the next copy is shifted when delivered so you can separate each set or job.
AdonisC3_GBcopyF_FM1.book Page 35 Thursday, November 28, 2002 1:53 PM Copier Functions A Press [Stack]. B Enter the number of copies with the number keys. C Place your originals, and then press the {Start} } key. Note ❒ When placing an original on the exposure glass, start with the first page to be copied. When placing an original in the ADF, set so the last page is on the bottom.
AdonisC3_GBcopyF_FM1.book Page 36 Thursday, November 28, 2002 1:53 PM Copying Stapling position and original setting Place all the originals in the ADF in the orientation in which they can be read normally. When placing the original on the exposure glass, keep the same orientation, but set the original facing downwards.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 39 Thursday, November 28, 2002 1:53 PM Copier Functions Original location Exposure glass Auto Document Feeder Stapling position *1 STAPLEEE Top 2 K 2 L *2 STAPLEFE *1 *2 Saddle Stitch L STAPLE34 STAPLE35 STAPLE36 STAPLE37 STAPLE38 STAPLE39 K This table shows the stapling positions, not the orientation of delivery. Not available for A3 and B4 JIS size paper. A Select one of the stapling positions.
AdonisC3_GBcopyF_FM1.book Page 40 Thursday, November 28, 2002 1:53 PM Copying ❖ 2 Tray finisher 2 ❖ Booklet finisher Note ❒ When you select the stapling position, Sort mode is automatically selected. Reference p.36 “Stapling position and original setting” B Enter the number of copy sets with the number keys. C Place your originals, and then press the {Start}} key. Note ❒ When placing an original on the exposure glass, start with the first page to be copied.
AdonisC3_GBcopyF_FM1.book Page 41 Thursday, November 28, 2002 1:53 PM Copier Functions Punch The optional 2 Tray finisher and the bridge unit are required to use this function. You can make punch holes in copies. ❖ 2 holes 2 ❖ 3 holes ❖ 4 holes Note ❒ You cannot use the bypass tray with this function.
AdonisC3_GBcopyF_FM1.book Page 42 Thursday, November 28, 2002 1:53 PM Copying ❒ The relationship between the orientation in which you place the original and the punch hole positions is as follows: ❖ Punch hole positions Original location Exposure glass 2 holes 2 Auto Document Feeder Punch hole positions *1 K L Standard 3 holes K L 4 holes K L 2 holes K L 90º Turn 3 holes K L 4 holes K L *1 42 This table shows the punch hole positions, not the orientation of delivery.
AdonisC3_GBcopyF_FM1.book Page 43 Thursday, November 28, 2002 1:53 PM Copier Functions A Select one of the punch hole positions. 2 B Enter the number of copy sets with the number keys. C Place your originals, and then press the {Start}} key. Duplex There are three types of duplex. ❖ 2 Sided → 1 Sided Copies each side of a two-sided original onto two separate pages. ❖ 1 Sided → 2 Sided Copies 2 one-sided pages on one two-sided page.
AdonisC3_GBcopyF_FM1.book Page 44 Thursday, November 28, 2002 1:53 PM Copying Original orientation and completed copies A Press [Dup./Combine/Series]. The resulting copy image will differ according to the orientation in which you place your originals (vertical K or horizontal L ). 2 Note ❒ You can also select “1 Sided to 2 Sided” or ”2 Sided to 2 Sided”directly by pressing the Copy Function Key. In that case, proceed to D.
AdonisC3_GBcopyF_FM1.book Page 45 Thursday, November 28, 2002 1:53 PM Copier Functions ❒ When placing an original on the exposure glass or in the ADF using Batch mode, press the {#} } key after all the originals have been scanned. One-Sided Combine Combine several pages onto one side of a sheet. ❖ 1 Sided 2 Pages → Combine 1 Side Copies two one-sided originals to one side of a sheet. Originals and copy orientation You can select the orientation.
AdonisC3_GBcopyF_FM1.book Page 46 Thursday, November 28, 2002 1:53 PM Copying ❖ Orientation of the original and image position of combine Open to left R originals 2 Reference Related initial settings p.96 “Erase Original Shadow in Combine” p.98 “Copy Order in Combine” p.97 “Separation Line in Combine” A Press [Dup./Combine/Series].
AdonisC3_GBcopyF_FM1.book Page 47 Thursday, November 28, 2002 1:53 PM Copier Functions Two-Sided Combine Combines various pages of originals into one sheet with two sides. ❖ 1 Sided 16 Pages → Combine 2 Side Copies 16 one-sided originals to one sheet with eight pages per side. 1 ❖ 1 Sided 4 Pages → Combine 2 Side Copies 4 one-sided originals to one sheet with two pages per side. 1 2 3 4 2 5 6 7 8 2 1 15 16 1 2 1 9 10 11 12 13 14 15 16 2 3 2 4 GCSHVY5E 4 3 1. Front 2.
AdonisC3_GBcopyF_FM1.book Page 48 Thursday, November 28, 2002 1:53 PM Copying ❖ 2 Sided 16 Pages → Combine 2 Side Copies 8 two-sided originals to one sheet with eight pages per side. 1 inal, and then press [Combine 2 Side] for Copy. 1 2 3 4 3 5 6 7 8 2 2 B Press [1 Sided] or [2 Sided] for Orig- 4 1 13 15 14 16 9 10 11 12 13 14 15 16 2 GCSHVY6E Reference Related initial settings p.46 “Orientation of the original and image position of combine” p.96 “Erase Original Shadow in Combine” p.
AdonisC3_GBcopyF_FM1.book Page 49 Thursday, November 28, 2002 1:53 PM Copier Functions Series Copies Separately copies the front and back of a two-sided original or the two facing pages of a bound original onto two sheets. Limitation ❒ You cannot use the Series Copies function from the ADF. ❖ Book→ →1 Sided You can make one-sided copies from two facing pages of a bound original (book). 1 2 1 2 ❖ Front&Back→ →2 Sided Copies each two-page spread original as it is onto both sides of a sheet.
AdonisC3_GBcopyF_FM1.book Page 50 Thursday, November 28, 2002 1:53 PM Copying A Press [Dup./Combine/Series]. Booklet/Magazine Copies two or more originals in page order. ❖ 1 Sided→ →Booklet Make copies in page order for a folded booklet as shown. 2 B Press [Series/Book]. C Press [Series]. →1 Sided], D Select [Book→ ❖ Open to left 1 2 3 [Book→ →2 Sided], or [Front&Back→ → 2 Sided], and then press [OK]. E Press [OK]. F Make sure that [Auto Paper Select] is selected.
AdonisC3_GBcopyF_FM1.book Page 51 Thursday, November 28, 2002 1:53 PM Copier Functions ❖ Open to left ❖ Open to right 1 2 7 7 2 8 1 5 4 6 3 8 2 GCBOOK4E ❖ 2 Sided→ →Magazine Copies two or more originals of two-sided to make copies in page order when they are folded and stacked. ❖ Open to right ❖ Open to left ❖ 1 Sided→ →Magazine Copies two or more originals to make copies in page order when they are folded and stacked.
AdonisC3_GBcopyF_FM1.book Page 52 Thursday, November 28, 2002 1:53 PM Copying How to fold and unfold copies to make a booklet 1 2 3 2 Note ❒ You cannot use the bypass tray with this function. ❒ The machine sets the reproduction ratio automatically to meet the paper size. 3 1 Reference Related initial settings 1 p.96 “Erase Original Shadow in Combine” GCBOOK2E A Select “Open to left”or “Open to right” with the User Tools. 1. Open to left 2.
AdonisC3_GBcopyF_FM1.book Page 53 Thursday, November 28, 2002 1:53 PM Copier Functions Image Repeat Reference Related initial settings The original image is copied repeatedly. p.96 “Image Repeat Separation Line” A Select the size of the copy paper and the reproduction ratio. 2 B Press [Edit/Stamp]. Note ❒ The number of repeated images depends on the original size, copy paper size, and reproduction ratio.
AdonisC3_GBcopyF_FM1.book Page 54 Thursday, November 28, 2002 1:53 PM Copying Double Copies One original image is copied twice on one copy as shown. ❒ The originals of size A5L, B6 JISKL, 51/2" × 81/2"L cannot be detected properly on the exposure glass. Be sure to select the copy paper manually or place the originals in the ADF. Reference Related initial settings 2 p.97 “Double Copies Separation Line” A Press [Edit/Stamp]. Note ❒ You cannot use the bypass tray with this function.
AdonisC3_GBcopyF_FM1.book Page 55 Thursday, November 28, 2002 1:53 PM Copier Functions B Press [Edit/Stamp]. Centring You can make copies with the image moved to the centre. 2 Note ❒ You cannot use the bypass tray with this function. ❒ The original sizes and orientations for centring are listed below. ❖ Metric version Original Original size and orientation placed on: Exposure glass C Press [Edit Image]. D Press [Centring]. E Press [OK]. F Press [OK]. G Place your originals, press the {Start} } key.
AdonisC3_GBcopyF_FM1.book Page 56 Thursday, November 28, 2002 1:53 PM Copying B Press [Edit Image]. C Press [Positive/Negative]. D Press [OK]. E Press [OK]. F Select the paper. G Place your originals, 2 press the {Start} } key. ❖ Centre/Border This mode erases both the centre and edge margins of the original image. and then Erase T his func tio n erases t he ce ntre and/or all four sides of the original image.
AdonisC3_GBcopyF_FM1.book Page 57 Thursday, November 28, 2002 1:53 PM Copier Functions Border erase Selecting [Diff. Width] A Press [Edit/Stamp]. A Press [Diff. Width]. 2 B Press [Erase]. C Set the erase border width. Selecting [Same Width] A Press [Same Width]. B Press the key for the border you want to change and set an erase border width with [n n] and [o o]. C Press [OK]. D Press [OK]. E Place your originals, and then press the {Start} } key. Centre erase A Press [Edit/Stamp].
AdonisC3_GBcopyF_FM1.book Page 58 Thursday, November 28, 2002 1:53 PM Copying Centre/Border erase Selecting [Diff. Width] A Press [Edit/Stamp]. A Press [Diff. Width]. B Press [Erase]. C Press [Centre/Border]. D Set the border to be erased. B Press the key for the part you want to change, and then set an erase margin width with [n n] and [o o]. C Press [OK]. 2 Selecting [Same Width] A Press [Same Width]. E Press [OK]. F Place your originals, and then press the {Start} } key.
AdonisC3_GBcopyF_FM1.book Page 59 Thursday, November 28, 2002 1:53 PM Copier Functions Note ❒ You can change the width of the binding margin as follows: Metric version 0–30 mm (in increments of 1 mm) Inch version 0"–1.2" (in increments of 0.1") A Press [Edit/Stamp]. E Press [OK]. F Press [OK]. G Place your originals, and then press the {Start} } key. 2 Background Numbering Use this function to have numbers printed on the background of copies.
AdonisC3_GBcopyF_FM1.book Page 60 Thursday, November 28, 2002 1:53 PM Copying C Press [Background Numbering]. D Enter the number to start count- Stamp position and original orientation ing from with the number keys, and then press [OK]. E Press [OK]. F Press [OK]. G Place your 2 originals, and then press the {Start} } key. Preset Stamp Messages used frequently can be stored in memory and stamped on copies. GCSTMP5E Note ❒ You cannot use the bypass tray with this function.
AdonisC3_GBcopyF_FM1.book Page 61 Thursday, November 28, 2002 1:53 PM Copier Functions C Press [Preset Stamp]. D Select the desired message. E Press [All Pages] or [1st Page only] to User Stamp Copies with the registered stamp. select the print page. Note ❒ You can change the position, size, and density of the stamp. See p.61 “Changing the stamp position, size and density”. 2 F After you specify all desired settings, press [OK]. G Press [OK].
AdonisC3_GBcopyF_FM1.book Page 62 Thursday, November 28, 2002 1:53 PM Copying Reference Related initial settings p.99 “Stamp Position 1 - 4” p.99 “Stamp Format 1 - 4” A Press [Edit/Stamp]. 2 To change the stamp position A Press [Change]. B Select the desired position, and then press [OK]. To program the user stamp B Press [Stamp]. C Press [User Stamp]. D Select the stamp you require. E Press [All Pages] or [1st Page only] to select the print page.
AdonisC3_GBcopyF_FM1.book Page 63 Thursday, November 28, 2002 1:53 PM Copier Functions F Press [Program/Delete Stamp]. G Press [Program], and then press the stamp number (1–4) you want to program. Note ❒ Stamp numbers with m already have settings in them. ❒ If the stamp number is already being used, the machine will ask you if you want to overwrite it . Press [Yes] or [No]. H Enter the user stamp name with the letter keys on the display panel. You can register up to 10 characters. I Press [OK].
AdonisC3_GBcopyF_FM1.book Page 64 Thursday, November 28, 2002 1:53 PM Copying I Press [Exit]. Stamp position and original orientation The display returns to the Copier/Document Server Features main menu. J Press [Exit]. Exits settings and gets ready to copy. 2 Date Stamp Use this function to print dates on your copies. Note ❒ You cannot use the bypass tray with this function. You can select from the following styles: • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY • DD.MM.YYYY • YYYY.MM.
AdonisC3_GBcopyF_FM1.book Page 65 Thursday, November 28, 2002 1:53 PM Copier Functions B Press [Stamp]. C Press [Date Stamp]. D Press [All Pages] or [1st Page only] to To change the stamp position A Press [Change]. select the print page. 2 B Select the desired date stamp position, and then press [OK]. Note ❒ You can change the font and position of the date to be stamped. See p.65 “To change the style of date”. E After Page Numbering Use this function to print page numbers on your copies.
AdonisC3_GBcopyF_FM1.book Page 66 Thursday, November 28, 2002 1:53 PM Copying Stamp position and original orientation A Press [Edit/Stamp]. 2 B Press [Stamp]. C Press [Page Numbering]. D Select the format. GCSTMP8E Note ❒ You cannot use the bypass tray with this function. Reference Related initial settings p.100 “Font” p.100 “Size” p.101 “Superimpose” p.100 “Stamp Format” p.100 “Duplex Back Page Stamping Position” p.101 “Stamp Position” p.
AdonisC3_GBcopyF_FM1.book Page 67 Thursday, November 28, 2002 1:53 PM Copier Functions Specify the first printing page and what page to number D Press [Last Number], enter the number of the page at which to stop numbering with the number keys, and then press the {#} } key. If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, ) 2 Note ❒ Below explains the example when (P1, P2...) is selected. The steps are the same for other cases. A Press [Change] on the right side.
AdonisC3_GBcopyF_FM1.book Page 68 Thursday, November 28, 2002 1:53 PM Copying ❒ To change the number entered, press [Clear] or the {Clear/Stop} } k ey , an d th e n e n t er a n e w number. C Press [Numbering from/to], and then enter the number of page from which to start numbering with the number keys, and then press the {#} } key. 2 If you selected (1-1, 1-2,…) A Press [Change ] on the right hand side.
AdonisC3_GBcopyF_FM1.book Page 69 Thursday, November 28, 2002 1:53 PM Copier Functions • Blank Covers Using this function, you can create cover sheets by adding additional pages of different paper or copying existing pages on different paper. Preparation Before selecting this function, set the tray for the front cover paper. See “Cover Sheet Tray”in “Tray Paper Settings”, General Settings Guide. Note ❒ The cover sheet should be the same size and orientation as the copy paper.
AdonisC3_GBcopyF_FM1.book Page 70 Thursday, November 28, 2002 1:53 PM Copying C Select [Copy] or [Blank] for the cover sheet. A Press [Cover/Slip Sheet]. D Select the paper tray that contains the sheet paper to copy the originals, and then press [OK]. E Place your originals in the ADF, 2 and then press the {Start} } key. Designate Use this function to have certain pages of your original copied onto slip sheets. B Press [Desig./Chapter]. C Press the key to select the chapter number.
AdonisC3_GBcopyF_FM1.book Page 71 Thursday, November 28, 2002 1:53 PM Copier Functions Chapter The page locations you specify with this function will appear on the front of copy sheets. Preparation Before selecting this function, press [Dup./Combine/Series] and select Duplex (1 Sided → 2 Sided) mode or Combine mode. Note ❒ This function can be used only w h e n y o u us e t h e D u p l e x ( 1 Sided→2 Sided) or Combine function. ❒ You can specify the pages up to 20.
AdonisC3_GBcopyF_FM1.book Page 72 Thursday, November 28, 2002 1:53 PM Copying • Blank 2 1 2 12 Note ❒ Press the {#} } key and select [OHP Sheet] in Special paper. See p.19 “When copying onto special paper”. A Press [Cover/Slip Sheet]. B Press [Slip Sheet]. C Select [Copy] or [Blank], and then press [OK]. D Select the paper tray containing the sheet paper to copy the originals. E Place the originals, and then press the {Start} } key.
AdonisC3_GBcopyF_FM1.book Page 73 Thursday, November 28, 2002 1:53 PM Storing Data in the Document Server Storing Data in the Document Server The Document Server enables you to store documents in the memory and print them as you want. Important ❒ Data stored in the machine might be lost if some kind of failure occurs. The supplier shall not be responsible for any damage that might result from the loss of data.
AdonisC3_GBcopyF_FM1.book Page 74 Thursday, November 28, 2002 1:53 PM Copying Programs You can store frequently used copy job settings in the machine memory and recall them for future use. 2 C Press [Register]. Storing a Program Note ❒ You can store up to 10 programs. ❒ You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or reset, or immediately after the operation switch is turned on. See p.92 “Change Initial Mode” .
AdonisC3_GBcopyF_FM1.book Page 75 Thursday, November 28, 2002 1:53 PM Programs F Press [OK]. When the settings are successfully stored, m appears on the left side and the program name appears on the right side of the registered program number. The display returns to the initial copy display for a while. Changing a stored program A Check the program settings. Note ❒ When you want to check the contents of a program, recall the program. See p.75 “Recalling a Program”.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 77 Thursday, November 28, 2002 1:53 PM 3. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Is Displayed The following chart contains explanations for the common messages. If other messages appear, follow the instructions as they are displayed. Note ❒ For messages that are not listed here, see General Settings Guide. Message Causes Solutions Cannot detect original size. Improper original is Select paper manually, not in Auto placed. See p.
AdonisC3_GBcopyF_FM1.book Page 78 Thursday, November 28, 2002 1:53 PM Troubleshooting 3 78 Message Causes Solutions Maximum number of sets is *. The number of copies exceeds the maximum copy quantity. You can change the maximum copy quantity. See p.92 “Max. Copy Quantity”. Cannot copy. Original is being scanned by other functions. The Document Server func- To cancel the job in process, press tion is in use. [Exit], and then press the {Document Server} } key. Next, press the {Clear/Stop} } key.
AdonisC3_GBcopyF_FM1.book Page 79 Thursday, November 28, 2002 1:53 PM If You Cannot Make Clear Copies If You Cannot Make Clear Copies Problem Causes Solutions Copies appear dirty. The image density is too dark. Adjust the image density. See p.21 “Adjusting Image Density”. Auto Image Density is not selected. Adjust the auto density. See p.21 “Adjusting Image Density”. The reverse side of an orig- The image density is too inal image is copied. dark.
AdonisC3_GBcopyF_FM1.book Page 80 Thursday, November 28, 2002 1:53 PM Troubleshooting If You Cannot Make Copies As You Want This section explains causes and remedies when copy results are not as expected. ❖ Basic Problem Causes Solutions Copies are not stapled. There are jammed staples in the stapler. Remove jammed staples. See General Settings Guide. 3 Note ❒ After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.
AdonisC3_GBcopyF_FM1.book Page 81 Thursday, November 28, 2002 1:53 PM If You Cannot Make Copies As You Want ❖ Edit Problem Causes Solutions In Double Copies mode, parts of the original image are not copied. Combination of original and copy paper is not correct. Select A3L for A4 K originals and A4 for A5 originals. In Border, Centre, or Centre/Border mode, parts of the original image are not copied. You set a wide erased mar- Make the margin width narrower. gin.
AdonisC3_GBcopyF_FM1.book Page 82 Thursday, November 28, 2002 1:53 PM Troubleshooting Problem Causes Copies are not in correct or- You placed the originals in der. the incorrect order. Solutions When placing a stack of originals in the ADF, the last page should be on the bottom. If you place an original on the exposure glass, start with the first page to be copied. ❖ Duplex Problem 3 Causes Solutions When using Duplex, copy is You placed the originals in made Top/Bottom even the wrong orientation.
AdonisC3_GBcopyF_FM1.book Page 83 Thursday, November 28, 2002 1:53 PM 4. User Tools (Copier/Document Server Features) User Tools Menu (Copier/Document Server Features) User Tools Item Names Default 1 General Features 1/4 See p.90 “General Features /4”.
AdonisC3_GBcopyF_FM1.book Page 84 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) User Tools Item Names Default General Features 3/4 See p.93 “General Features 3/4”. Copy Function Key: F 1–F5 • F1: 1 Sided → 2 Sided : T to T • F2: 2 Sided : T to T → 2 Sided : T to T • F3: 1 Sided → 1 Sided Combine • F4: 1 Sided → 1 Sided Combine: 4 originals • F5: Create Margin General Features 4/4 See p.
AdonisC3_GBcopyF_FM1.book Page 85 Thursday, November 28, 2002 1:53 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Default Reproduction Ratio 2/2 See p.94 “Reproduction Ratio 2/2”.
AdonisC3_GBcopyF_FM1.book Page 86 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) User Tools Item Names Default Edit 2/2 See p.96 “Edit 2/2”. Image Repeat Separation Line None Double Copies Separation Line None Separation Line in Combine None Copy on Designating Paper Yes Front Cover Copy in Combine Combine Copy on Designating Page in Combine Combine Orientation: Booklet, Magazine Open to Left Copy Order in Combine From left to right Stamp See p.
AdonisC3_GBcopyF_FM1.book Page 87 Thursday, November 28, 2002 1:53 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Date Stamp Default Format Metric version: DD/MM/YYYY Inch version: MM/DD/YYYY Font Stamp Position Font 1 Metric version • Position: Top left • Top Margin: 8 mm • Left Margin: 32 mm Inch version • Position: Top left 4 • Top Margin: 0.3" • Left Margin: 0.8" Stamp Setting Page Numbering All Pages Size Auto Superimpose No Stamp Format P1, P2...
AdonisC3_GBcopyF_FM1.book Page 88 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) User Tools Item Names Page Numbering Default Stamp Position Metric version • Position P1, 1/5, P.1, 1: Top right -1-, 1-1: Bottom centre • Top/Bottom Margin P1, 1/5, P.1, 1: 12 mm -1-, 1-1: 8 mm • Left/Right Margin P1, 1/5, P.1, 1: 12 mm -1-, 1-1: 0 mm Inch version • Position P1, 1/5, P.1, 1: Top right -1-, 1-1: Bottom centre 4 • Top/Bottom Margin P1, 1/5, P.1, 1: 0.5" -1-, 1-1: 0.
AdonisC3_GBcopyF_FM1.book Page 89 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) Accessing User Tools (Copier/Document Server Features) This section is for the key operators in charge of this machine. You can change or set the machine's default. Note ❒ Be sure to exit from User Tools and return to the initial copy display after all the settings are finished. This section describes system settings that you can set for the copier.
AdonisC3_GBcopyF_FM1.book Page 90 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) General Features 1/4 ❖ Auto Paper Select Priority As a default, Auto Paper Select is selected. You can cancel this setting. See p.23 “Selecting Copy Paper”. Note ❒ Default: Display ❒ If you select [Hide], the display is shown as below. When [Auto Paper Select] is pressed, paper sizes appear on the display.
AdonisC3_GBcopyF_FM1.book Page 91 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) ❖ Auto Image Density Priority Set this function to use Auto Image Density when the power is turned on, reset or modes are cleared. Note ❒ Default: Text: On, Text/Photo: On, Photo: Off, Pale: On, Generation Copy: On ❖ Copy Quality You can adjust the quality level of copies for each of the original types (Text, Text/Photo, Photo, Pale, Generation Copy).
AdonisC3_GBcopyF_FM1.book Page 92 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) General Features 2/4 ❖ Duplex Mode Priority You can select the type of Duplex function effective when the machine is turned on, reset, or modes are cleared. Note ❒ Default: Text: Normal, Text/Photo: Normal, Photo: Normal, Pale: Normal, Generation Copy: Normal ❖ Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies.
AdonisC3_GBcopyF_FM1.book Page 93 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) General Features 3/4 General Features 4/4 ❖ Copy Function Key: F1-F5 You can assign frequently used functions to function keys F1 to F5. ❖ Document Server Storage Key: F 1–F5 You can assign frequently used functions to function keys F1 to F5. You can also change the assigned functions.
AdonisC3_GBcopyF_FM1.book Page 94 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) Reproduction Ratio 1/2 ❖ Shortcut R/E You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also change registered Reduce/Enlarge ratios.
AdonisC3_GBcopyF_FM1.book Page 95 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) ❖ Priority Setting: Reduce You can set the ratio with priority when [Reduce/Enlarge] is pressed, followed by [Reduce]. Note ❒ Default: • Metric version: 71% • Inch version: 73% ❖ Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.
AdonisC3_GBcopyF_FM1.book Page 96 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) Note ❒ Default: • Metric version: Right 5 mm • Inch version: Right 0.2" ❖ 1 Sided→ →2 Sided Auto Margin: TtoB In 1 sided → 2 sided Duplex mode, you can specify the margins on the back side. The value set for "Back Margin: Top/Bottom" is used. Note ❒ Default: • Metric version: Top/Bottom 0 mm • Inch version: Top/Bottom 0.
AdonisC3_GBcopyF_FM1.book Page 97 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) ❖ Double Copies Separation Line You can select a separation line in Double Copies mode from None, Solid, Broken A, Broken B, or Crop Marks. • None • Broken A • Broken B • Crop Marks • Solid • Broken A • Broken B Note ❒ Default: None 4 ❖ Copy on Designating Paper You can specify whether to copy on the designate.
AdonisC3_GBcopyF_FM1.book Page 98 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) ❖ Orientation: Booklet, Magazine You can select the type of originals for Booklet or Magazine mode. Note ❒ Default: Open to Left Reference p.52 “How to fold and unfold copies to make a booklet” p.52 “How to fold and unfold copies to make a magazine” ❖ Copy Order in Combine You can set the copy order in Combine mode to Left to Right or Top to Bottom.
AdonisC3_GBcopyF_FM1.book Page 99 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) Note ❒ Default: • Metric Version: • Position: Top right • Top Margin: 24 mm • Right Margin: 24 mm • Inch Version: • Position: Top right • Top Margin: 1.0" • Right Margin: 1.0" ❖ Stamp Format You can adjust the size, density, and print page for the stamp. • Size You can set the size of the stamp. Note ❒ Default: 1X • Density You can set the pattern used to print the stamp.
AdonisC3_GBcopyF_FM1.book Page 100 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) Date Stamp ❖ Format You can select the date format for Date Stamp mode. Note ❒ Default: • Metric version: DD/MM/YYYY • Inch version: MM/DD/YYYY ❖ Font You can select the Date Stamp font. 4 Note ❒ Default: Font 1 ❒ This setting is linked with Page Numbering. ❖ Stamp Position You can set the position at which the stamp is printed. Press the arrow keys to adjust the position.
AdonisC3_GBcopyF_FM1.book Page 101 Thursday, November 28, 2002 1:53 PM Accessing User Tools (Copier/Document Server Features) ❖ Page Numbering in Combine You can set page numbering when using the Combine function and the Page Numbering function together. Note ❒ Default: Per original ❖ Stamp on Designated Slip Sheet You can select to print the page number onto slip sheets when using the Designate function set to [Copy] and the Page Numbering function together. Note ❒ Default: No ❖ Stamp Position P1, P2..
AdonisC3_GBcopyF_FM1.book Page 102 Thursday, November 28, 2002 1:53 PM User Tools (Copier/Document Server Features) ❖ Auto Sort You can specify whether Sort mode is selected when the machine is turned on or the mode is cleared. Default: No ❖ Memory Full Auto Scan Restart When memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. You can enable or disable this function.
AdonisC3_GBcopyF_FM1.book Page 103 Thursday, November 28, 2002 1:53 PM 5. Specifications Combination Chart The combination chart given below shows which modes can be used together. When you read the chart, see the following table: ❍ means that these modes can be used together. $ means that these modes cannot be used together. The second mode selected will be the mode you're working in. × means that these modes cannot be used together. The first mode selected will be the mode you're working in.
AdonisC3_GBcopyF_FM1.book Page 104 Thursday, November 28, 2002 1:53 PM Specifications Supplementary Informations ❖ Mixed Size mode • Since small originals may not be correctly aligned with the original guide, the copy image may be slanted. • Copying speed and scanning speed will be reduced. • You can place originals of two different sizes at a time.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 107 Thursday, November 28, 2002 1:53 PM Supplementary Informations Paper size and orientation 2 Tray finisher Paper capacity and weight Finisher shift tray 1 A4KL, 81/2" × 11"KL, A5K, B5 JISKL 500 sheets (80 g/m2) (20 lb.) A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 250 sheets (80 g/m2) (20 lb.) A5L, 51/2" × 81/2"KL 100 sheets (80 g/m2) (20lb.) Finisher shift tray 2 Booklet finisher A4K, 81/2" × 11"K 2,000 sheets *5 (80 g/m2) (20 lb.
AdonisC3_GBcopyF_FM1.book Page 108 Thursday, November 28, 2002 1:53 PM Specifications ❖ Staple • The following type of paper cannot be stapled: • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Thick paper • Curled paper • Paper of low stiffness • Paper of mixed sizes • In the following cases, copies will be delivered to the shift tray without stapling: • When the number of sheets for one set is over stapler capacity. • When memory reaches 0% during copying.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.book Page 110 Thursday, November 28, 2002 1:53 PM Specifications • The tray capacity for the stapled sheets are as follows: (paper weight: 80 g/m2, 20 lb.
AdonisC3_GBcopyF_FM1.book Page 111 Thursday, November 28, 2002 1:53 PM Supplementary Informations • The maximum original image size that can be rotated is as follows: Metric version A4 Inch version 81/2" × 11" • When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or Auto Reduce/Enlarge function, “Blank part will appear. Check orientation.”message may be displayed depending on the orientation of originals and paper you placed. In this case, change the paper orientation.
AdonisC3_GBcopyF_FM1.book Page 112 Thursday, November 28, 2002 1:53 PM Specifications ❖ Duplex • You cannot use the following copy paper with this function: • Paper smaller than A5K, 51/2" × 81/2"K (possible on A5L, 51/2" × 81/2"L) • Paper thicker than 105 g/m2, 28 lb. • Paper thinner than 64 g/m2, 17 lb. • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Postcards • When an odd number of originals is placed in the ADF, the back of the last page of copied paper is blank.
AdonisC3_GBcopyF_FM1.book Page 113 Thursday, November 28, 2002 1:53 PM Supplementary Informations ❖ Booklet/Magazine • The machine sets the reproduction ratio automatically to meet the paper size and copies the originals together onto the paper. • The reproduction ratios you can specify are 25–400%. • If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the image might not be copied.
AdonisC3_GBcopyF_FM1.book Page 114 Thursday, November 28, 2002 1:53 PM Specifications ❖ Margin Adjustment • If you set a binding margin that is too wide, part of the image may not be copied. • When making copies in Combine mode, the binding margin is added to the copies after the combination is finished. ❖ Background Numbering The numbers appear to overlap the copied image in some cases. ❖ Preset Stamp • You can change the size and density of the stamp with User Tools.
AdonisC3_GBcopyF_FM1.book Page 115 Thursday, November 28, 2002 1:53 PM Supplementary Informations • Page Numbering per copy: Combined with 1 Sided/2 Sided in the Combine function If you combine this function with the Duplex ( Top to Top ) function and select [P1, P2] or [1/n, 2/n], page numbers on the back are printed as follows: 1 2 5 GCSTMPBE 1. Front 2. Back ❖ Front Cover, Front/Back Cover • If Blank mode is selected, the cover will not be counted as a copy.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
AdonisC3_GBcopyF_FM1.
