Printer Instructions Manual

Operating Instructions Client Reference
122
Printing without Using a Print Server
Preparation
To use a printer connected to the Ethernet interface, select "SmartNetMonitor" or "LPR Port" when
installing the printer driver.
• SmartNetMonitor
See p.122 “Configuring the Protocols” and p.126 “Installing Software” and p.127 “Installing the
PCL 5c or RPCS Printer Driver” or p.132 “Installing the PostScript Printer Driver”.
• LPR Port
See p.122 “Configuring the Protocols” and p.127 “Installing the PCL 5c or RPCS Printer Driver”
or p.132 “Installing the PostScript Printer Driver”.
Note
❒ If you want to use “LPR Port”, "Microsoft TCP/ IP Printing" must be installed.
Configuring the Protocols
Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the printer and Windows NT 4.0 to use the TCP/IP protocol and
IPP.
❖
❖❖
❖ Configuring the printer
Configure the printer to use the TCP/IP protocol.
• Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
• Assign an IP address and make other settings required for using the TCP/IP protocol.