User manual
Table Of Contents
- GX5050 User Guide
- J011 User Guide
- Table of Contents
- Read This First
- Paper
- Replacing Consumables
- Making Printer Settings
- Troubleshooting
- Printing Will Not Start
- Paper Is Not Fed or Delivered Normally
- Paper Jam
- Removing Paper Jammed in the Paper Tray (Tray 1)
- Removing Paper Jammed in the Optional Tray (Tray 2 (Optional))
- Removing Paper Jammed in the Bypass Tray (optional)
- Removing Paper Jammed under the Top Cover
- Removing Paper Jammed around the Guide Board
- Removing Paper Jammed in the Duplex Unit
- Removing Paper Jammed in the Output Tray
- Print Results Are Not Satisfactory
- Error & Status Messages on the Control Panel
- Status Monitor Errors
- Status Monitor Does Not Open
- No Response from Printer
- No Paper/Tray Not Detected (Tray 1)
- No Paper/Tray Not Detected (Tray 2)
- No Paper/Tray Not Detected (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (Tray 1)
- Paper Size Mismatch/Paper Type Mismatch (Tray 2)
- Paper Size Mismatch/Paper Type Mismatch (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (AutoTray Select)
- Cover Open
- Duplex Unit Not Detected
- Cover Open / Print Cartridge(s) Not Detected
- Cartridge End
- Cartridge/Print-head Tank Empty
- When the Ink Collector Unit is Almost Full/Full
- Ink Collector Unit Not Detected
- Out of Printable Temperature Range
- Printer Error
- Network Interface Board Error
- Adjusting the Printer
- Inquiries and Consumables
- Maintaining
- Preparing for Printing
- Confirming the Connection Method
- Installing the Printer Driver (USB)
- Sharing the Printer
- Using the SmartDeviceMonitor for Client Port
- Using the Standard TCP/IP Port
- Using the LPR Port
- Using as the Windows Network Printer
- Using as the NetWare Print Server/Remote Printer
- If a Message Appears during Installation
- Making Option Settings for the Printer
- Printer Driver
- Printing
- Printing on Various Paper Types
- Canceling Printing
- Adjusting Print Quality
- Various Print Functions
- Printing Multiple Document Sets
- Collating
- Printing Web Pages
- Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
- Reducing and Enlarging by a Specified Ratio (Scale, Directional magnification)
- Reducing to A4/Letter Automatically
- Rotating the Image by 180 Degrees
- Printing on Registered Custom Size Paper
- Printing on Unregistered Custom Size Paper
- Printing on Both Sides of Paper
- Printing Multiple Document Pages per Sheet (Layout)
- Splitting the Document Image across Multiple Sheets (Poster)
- Printing from the Last Page
- Creating a Binding Margin
- Printing Documents with a Header and Footer
- Printing with a Layout Suitable for Making Booklets
- Printing Images or Text Superimposed on Prints
- Printing Documents with an Overlay Image Superimposed (Overlay)
- Unauthorized Copy Control
- Displaying the Preview before Printing
- Custom Settings
- Supporting Multi-Languages
- Monitoring and Configuring the Printer
- Using a Printer Server
- Additional Information
- J011 Notes for Users
- J011 User Guide
236
Monitoring and Configuring the Printer
5 : Configure SNMP
6 : Configure SMTP
7 : Configure SMTP (Group 1)
8 : Configure SMTP (Group 2)
9 : Configure SMTP (Group 3)
10 : Configure SMTP (Group 4)
96 : Display Status
97 : Reset Settings to Defaults
98 : Restart Print Server
99 : Exit
Configure General
Configure TCP/IP
Settings Description
Change root Password You can change the administrator's password.
LAN Interface You can specify which interface to use.
Settings Description
DHCP/BOOTP You can select whether or not to use the DHCP/BOOTP pro-
tocol.
RARP You can select whether or not to use the RARP protocol.
IP Address You can specify the static IP address.
Subnet Mask You can specify the subnet mask.
Default Gateway You can specify the gateway address.
Host Name You can specify the host name.
Use DHCP Domain Option You can select whether or not to use the DHCP domain op-
tion.
Domain You can specify the domain name.
IPv6 Function You can select whether or not to use IPv6.
DNS You can specify the DNS setting.
IP Filter Config – Filter Mode You can specify the IP filter operating mode.
IP Filter Config – Filter #0 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #0 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #1 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #1 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #2 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #2 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #3 Start Address You can specify the IP filter's start address.