User manual
Table Of Contents
- GX5050 User Guide
- J011 User Guide
- Table of Contents
- Read This First
- Paper
- Replacing Consumables
- Making Printer Settings
- Troubleshooting
- Printing Will Not Start
- Paper Is Not Fed or Delivered Normally
- Paper Jam
- Removing Paper Jammed in the Paper Tray (Tray 1)
- Removing Paper Jammed in the Optional Tray (Tray 2 (Optional))
- Removing Paper Jammed in the Bypass Tray (optional)
- Removing Paper Jammed under the Top Cover
- Removing Paper Jammed around the Guide Board
- Removing Paper Jammed in the Duplex Unit
- Removing Paper Jammed in the Output Tray
- Print Results Are Not Satisfactory
- Error & Status Messages on the Control Panel
- Status Monitor Errors
- Status Monitor Does Not Open
- No Response from Printer
- No Paper/Tray Not Detected (Tray 1)
- No Paper/Tray Not Detected (Tray 2)
- No Paper/Tray Not Detected (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (Tray 1)
- Paper Size Mismatch/Paper Type Mismatch (Tray 2)
- Paper Size Mismatch/Paper Type Mismatch (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (AutoTray Select)
- Cover Open
- Duplex Unit Not Detected
- Cover Open / Print Cartridge(s) Not Detected
- Cartridge End
- Cartridge/Print-head Tank Empty
- When the Ink Collector Unit is Almost Full/Full
- Ink Collector Unit Not Detected
- Out of Printable Temperature Range
- Printer Error
- Network Interface Board Error
- Adjusting the Printer
- Inquiries and Consumables
- Maintaining
- Preparing for Printing
- Confirming the Connection Method
- Installing the Printer Driver (USB)
- Sharing the Printer
- Using the SmartDeviceMonitor for Client Port
- Using the Standard TCP/IP Port
- Using the LPR Port
- Using as the Windows Network Printer
- Using as the NetWare Print Server/Remote Printer
- If a Message Appears during Installation
- Making Option Settings for the Printer
- Printer Driver
- Printing
- Printing on Various Paper Types
- Canceling Printing
- Adjusting Print Quality
- Various Print Functions
- Printing Multiple Document Sets
- Collating
- Printing Web Pages
- Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
- Reducing and Enlarging by a Specified Ratio (Scale, Directional magnification)
- Reducing to A4/Letter Automatically
- Rotating the Image by 180 Degrees
- Printing on Registered Custom Size Paper
- Printing on Unregistered Custom Size Paper
- Printing on Both Sides of Paper
- Printing Multiple Document Pages per Sheet (Layout)
- Splitting the Document Image across Multiple Sheets (Poster)
- Printing from the Last Page
- Creating a Binding Margin
- Printing Documents with a Header and Footer
- Printing with a Layout Suitable for Making Booklets
- Printing Images or Text Superimposed on Prints
- Printing Documents with an Overlay Image Superimposed (Overlay)
- Unauthorized Copy Control
- Displaying the Preview before Printing
- Custom Settings
- Supporting Multi-Languages
- Monitoring and Configuring the Printer
- Using a Printer Server
- Additional Information
- J011 Notes for Users
- J011 User Guide
237
Monitoring and Configuring the Printer
Configure SMB
Configure SNMP
Configure SMTP (Group 1)
Configure SMTP (Group 2)
IP Filter Config – Filter #3 End Address You can specify the IP filter's end address.
Settings Description
SMB You can select whether or not to use the SMB protocol.
Computer Name You can specify the computer name.
Workgroup You can specify the workgroup.
Comment You can enter a comment.
Printing Complete Message You can select whether or not to issue the Printing Complete
message.
Browse Master You can select whether or not to use the Browse Master.
Settings Description
Authentic Community You can specify the SNMP authentic community name.
Trap Community You can specify the SNMP trap community name.
Trap Address (IP) You can specify the IP address of the SNMP trap destination.
SysContact You can specify SysContact.
SysName You can specify SysName.
SysLocation You can specify SysLocation.
Enable Authen Trap You can enable or disable Enable Authen Trap.
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Text in E-mail You can enter a shared comment.
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Settings Description