User manual
Table Of Contents
- GX5050 User Guide
- J011 User Guide
- Table of Contents
- Read This First
- Paper
- Replacing Consumables
- Making Printer Settings
- Troubleshooting
- Printing Will Not Start
- Paper Is Not Fed or Delivered Normally
- Paper Jam
- Removing Paper Jammed in the Paper Tray (Tray 1)
- Removing Paper Jammed in the Optional Tray (Tray 2 (Optional))
- Removing Paper Jammed in the Bypass Tray (optional)
- Removing Paper Jammed under the Top Cover
- Removing Paper Jammed around the Guide Board
- Removing Paper Jammed in the Duplex Unit
- Removing Paper Jammed in the Output Tray
- Print Results Are Not Satisfactory
- Error & Status Messages on the Control Panel
- Status Monitor Errors
- Status Monitor Does Not Open
- No Response from Printer
- No Paper/Tray Not Detected (Tray 1)
- No Paper/Tray Not Detected (Tray 2)
- No Paper/Tray Not Detected (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (Tray 1)
- Paper Size Mismatch/Paper Type Mismatch (Tray 2)
- Paper Size Mismatch/Paper Type Mismatch (Bypass Tray)
- Paper Size Mismatch/Paper Type Mismatch (AutoTray Select)
- Cover Open
- Duplex Unit Not Detected
- Cover Open / Print Cartridge(s) Not Detected
- Cartridge End
- Cartridge/Print-head Tank Empty
- When the Ink Collector Unit is Almost Full/Full
- Ink Collector Unit Not Detected
- Out of Printable Temperature Range
- Printer Error
- Network Interface Board Error
- Adjusting the Printer
- Inquiries and Consumables
- Maintaining
- Preparing for Printing
- Confirming the Connection Method
- Installing the Printer Driver (USB)
- Sharing the Printer
- Using the SmartDeviceMonitor for Client Port
- Using the Standard TCP/IP Port
- Using the LPR Port
- Using as the Windows Network Printer
- Using as the NetWare Print Server/Remote Printer
- If a Message Appears during Installation
- Making Option Settings for the Printer
- Printer Driver
- Printing
- Printing on Various Paper Types
- Canceling Printing
- Adjusting Print Quality
- Various Print Functions
- Printing Multiple Document Sets
- Collating
- Printing Web Pages
- Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
- Reducing and Enlarging by a Specified Ratio (Scale, Directional magnification)
- Reducing to A4/Letter Automatically
- Rotating the Image by 180 Degrees
- Printing on Registered Custom Size Paper
- Printing on Unregistered Custom Size Paper
- Printing on Both Sides of Paper
- Printing Multiple Document Pages per Sheet (Layout)
- Splitting the Document Image across Multiple Sheets (Poster)
- Printing from the Last Page
- Creating a Binding Margin
- Printing Documents with a Header and Footer
- Printing with a Layout Suitable for Making Booklets
- Printing Images or Text Superimposed on Prints
- Printing Documents with an Overlay Image Superimposed (Overlay)
- Unauthorized Copy Control
- Displaying the Preview before Printing
- Custom Settings
- Supporting Multi-Languages
- Monitoring and Configuring the Printer
- Using a Printer Server
- Additional Information
- J011 Notes for Users
- J011 User Guide
Making Printer Settings
51J0116601_1.01 Copyright © 2005, 2006 All rights reserved.
Making Printer Settings
Making Printer Settings Using the Control Panel ................................................................................................................... 52
Paper Input Menu.......................................................................................................................................................................54
Changing the Paper Input Menu..................................................................................................................................54
List/Test Print Menu ................................................................................................................................................................... 55
Printing a Configuration Page ...................................................................................................................................... 55
Interpreting the Configuration Page ........................................................................................................................... 56
Maintenance Menu ...................................................................................................................................................................57
Nozzle Check................................................................................................................................................................... 58
Head-clearning................................................................................................................................................................. 59
Head-flushing .................................................................................................................................................................... 60
Head Position.................................................................................................................................................................... 62
Adj.Paper Feed................................................................................................................................................................. 64
Registration ........................................................................................................................................................................ 66
System Menu .............................................................................................................................................................................. 68
Changing the System Menu...........................................................................................................................................71
Host Interface Menu..................................................................................................................................................................72
Changing the Host Interface Menu .............................................................................................................................74
PCL Menu ..................................................................................................................................................................................... 74
Changing the PCL Menu.................................................................................................................................................76
Language Menu ........................................................................................................................................................................ 77
Changing the Language Menu.................................................................................................................................... 77
Maintaining the Printer Using Utilities........................................................................................................................................78
Nozzle Check .............................................................................................................................................................................78
Head-cleaning............................................................................................................................................................................ 79
Head-flushing.............................................................................................................................................................................. 80
Adjust Print-head Positions....................................................................................................................................................... 80
Registration.................................................................................................................................................................................. 82
Adjust Paper Feed ..................................................................................................................................................................... 83
Restore Defaults/Other Settings ............................................................................................................................................ 85
Restoring the Settings to Their Defaults ...................................................................................................................... 85
Specifying an I/O Timeout ........................................................................................................................................... 85