User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
18
Step 5 : Enable BRIDGE Peer's MAC Address
Click Wireless -> BRIDGE Setup, and then BRIDGE Setup page appears.
Enable “BRIDGE Peer's MAC Address”, and then enter the related information. Click Save button to save the
settings.
Step 6 : Wireless General Settings
Click Wireless -> General Setup, and then General Setup page appears.
Select the “Channel” and “Transmit Rate Control” information required in the General Setup field. The
information must be the same the other BRIDGE device.
Click Reboot to activate all settings configured so far.
Congratulation !
The BRIDGE mode is now successfully configured.
BRIDGE
BRIDGE
Bridge Setup
Virtual BS Setup