User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
24
4.1 System
This section provides information in configuring the following functions: Operating Mode, LAN Setup,
Management, Time Server, SNMP Setup
4.1.1 Operating Mode
WCB1000H5PX/WCB1010H5PX supports three operation modes; BASE STATION mode , BRIDGE mode and
CPE mode. The administrator can set the desired mode via this page, and then configure the system according to
their deployment needs.
 BS Mode : Check BS Mode button to enable BASE STATION mode, and then click “Save&Reboot” to
activate the setting.
 B Mode : Check B Mode button to enable Bridge mode, and then click “Save&Reboot” to activate the
setting.
 CPE Mode : Check CPE Mode button to enable CPE mode, and then click “Save&Reboot” to activate the
setting.
BS mode
B mode