User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
35
 DTIM Interval : Input the DTIM Interval that is generated within the periodic beacon at a specified frequency.
Higher DTIM will let the wireless client save energy more, but the throughput will be growing worse.
 Fragment Threshold : The value specifies the maximum size of packet allowed before data is fragmented into
multiple packets. Please use this value to tune the wireless connection if lots of retransmission happens. Enter
a value ranging from 256 to 2346.
 RTS Threshold : Tuning the Request to Send, RTS threshold will help the system control its access to
medium and alleviate the hidden node problem. Enter a value ranging from 1 to 2346.
 Short Preamble : The short preamble provides 56-bit Synchronization field to improve WLAN transmission
efficiency. Check Enable button for using Short Preamble, and Disable for using the Long Preamble, 128-bit
Synchronization field, option.
 Tx Burst : Click Enable button to activated Tx Burst, and Disable to deactivated Tx Burst.
 802.11g Protection Mode : Click Enable button to activated 802.11g Protection Mode, and Disable to
deactivated 802.11g Protection Mode.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes. The items in this page are for BASE STATION's RF advanced settings and will be applied to
all VBSs.