User's Manual

User Manual

WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE

5.1.2 LAN Setup

Here is instruction for how to setup the local IP Address and Netmask. Please click on System -> LAN and follow

the below setting.

 Mode : Check either “Static IP” or “Dynamic IP” button as desired to set up the system IP of LAN port .

 Static IP : The administrator can manually setup the LAN IP address when static IP is available/ preferred.

 IP Address : The IP address of the LAN port; default IP address is 192.168.2.254

 IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0

 IP Gateway : The default gateway of the LAN port; default Gateway is 192.168.2.1

 Dynamic IP : This configuration type is applicable when the WCB1000H5PX/ WCB1010H5PX is

connected to a network with the presence of a DHCP server; all related IP information will be provided by

the DHCP server automatically.

 Hostname : The Hostname of the LAN port

 DNS : Check either “No Default DNS Server” or “Specify DNS Server IP” button as desired to set up the

system DNS.