User's Manual

User Manual

WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE

5.2.2 Advanced Setup

The administrator can change the Slot Time, ACK/CTS Timeout, RTS threshold and fragmentation threshold

settings for the system. Please click on Wireless -> Advanced Setup and follow the below setting.

 Slot Time : Enter the desired slot time for the BRIDGE.

 ACK Timeout : The time interval for waiting the “ ACKnowledgment frame”. If the ACK is not received within

that timeout period then the packet will be re-transmitted. Higher ACK Timeout will decrease the packet lost,

but the throughput will be growing worse.

 CTS Timeout : Enter the desired CTS timeout for the BRIDGE.

Note : Slot Time and ACK/CTS Timeout settings for long distance links. It is important to change the

value to find the optimal setting. A value too low will give very low throughput, A high value may

slowdown the link.

 RSSI Threshold : RSSI Threshold can be used to control the level of noise received by the device.

 Beacon Interval : Enter a value between 10 and 5000 msec. The default value is 100 milliseconds. The

entered time means how often the beacon signal transmission between the base station and the wireless

network.

 DTIM Interval : Input the DTIM Interval that is generated within the periodic beacon at a specified frequency.

Higher DTIM will let the wireless client save energy more, but the throughput will be growing worse.

Bridge Setup