User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
76
Chapter 6. CPE Mode Configuration
When CPE mode is activated, the system can be configured as a CPE. This section provides information in
configuring the CPE mode with graphical illustrations. WCB1000H5PX/WCB1010H5PX provides functions as
stated below where they can be configured via a user-friendly web based interface.
OPTION System Wireless Firewall NAT Utilities Status
Operating
Mode
General
Settings
IP Rule Setup Virtual Server
Profiles
Settings
System
Overview
WAN
Advanced
Settings
MAC Rule
Setup
DMZ
Firmware
Upgrade
DHCP Clients
LAN Site Survey Ping Utility Event Log
Management Reboot
Time Server
Functions
SNMP
Table 6-1: CPE Mode Functions
Figure 6-1: CPE Mode Main Page