User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
79
 Dynamic IP : This configuration type is applicable when the WCB1000H5PX/ WCB1010H5PX is
connected to a network with the presence of a DHCP server; all related IP information will be provided by
the DHCP server automatically. If the IP Address do not assigned from DHCP server, the system need
manual connect to DHCP server. Please refer to Section 6.6.2-Overview (WAN Information)
 Hostname : The Hostname of the WAN port
 PPPoE : This configuration type is applicable when the WCB1000H5PX/ WCB1010H5PX is connected to
a network with the presence of a PPPoE server.
 User Name : Enter User Name for PPPoE connection
 Password : Enter Password for PPPoE connection
 MTU : MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to set
the MTU setting in order to work correctly with your ISP. Default is 1492 bytes.
 Idle Time : The time of inactivity before disconnecting your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for which the Internet connect is maintained during
inactivity. If the connection is inactive for longer than the defined Idle Time, then the connection will be
dropped.
 Auto Reconnect : Click Auto Reconnect button, the system will be auto reconnect with PPPoE
server through WAN port. If unclick this button, the system need manual connect to PPPoE server.
Please refer to Section 6.6.2-Overview (WAN Information)