User's Manual

User Manual

WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE

 Key Length : Select the desire option are 64 bits, 128 bits or 152 bits from drop-down list.

 WEP auth Method : Enable the desire option among Open system or Shared.

 WEP Key # : Select key index is used to designate the WEP key during data transmission. Enter HEX

format WEP key value; the system support up to 4 sets of WEP keys.

 WPA-PSK (or WPA2-PSK) : WPA (or WPA2)Algorithms, allows the system accessing the network by

using the WPA-PSK protected access.

 Cipher Suite : Check on the respected button to enable either AES or TKIP cipher suites; default is

TKIP.

 Key Type : Check on the respected button to enable either ASCII or HEX format for the Pre-shared

Key.

 Pre-shared Key : Enter the information for pre-shared key; the format of the information shall

according to the key type selected.

Note : Pre-shared key can be either entered as a 256-bit secret in 64 HEX digits format, or 8 to 63 ASCII

characters.

Change these settings as described here and click Save button to save your changes. Click Reboot button to

activate your changes.