User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
92
6.2.2 Advanced Setup
The administrator can change the Slot Time, ACK/CTS Timeout, RTS threshold and fragmentation threshold
settings for the system. Please click on Wireless -> Advanced Setup and follow the below setting.











 Slot Time : Enter the desired slot time for the BRIDGE.
 ACK Timeout : The time interval for waiting the “ ACKnowledgment frame”. If the ACK is not received within
that timeout period then the packet will be re-transmitted. Higher ACK Timeout will decrease the packet lost,
but the throughput will be growing worse.
 CTS Timeout : Enter the desired CTS timeout for the BRIDGE.
 Fragment Threshold : The value specifies the maximum size of packet allowed before data is fragmented into
multiple packets. Please use this value to tune the wireless connection if lots of retransmission happens. Enter
a value ranging from 256 to 2346.
 RTS Threshold : Tuning the Request to Send, RTS threshold will help the system control its access to
medium and alleviate the hidden node problem. Enter a value ranging from 1 to 2346.
 Short Preamble : The short preamble provides 56-bit Synchronization field to improve WLAN transmission
efficiency. Check Enable button for using Short Preamble, and Disable for using the Long Preamble, 128-bit
Synchronization field, option.
 Tx Burst : Click Enable button for using Tx Burst, and Disable for non using Tx Burst.
 WMM : Select Enable, the packets with QoS WMM will has higher priority.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes.