User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
2.2 Software Configuration
2.2.1 Instruction to Web Management Interface
AP981X/AP981WX supports web-based configuration. Upon the completion of hardware installation,
AP981X/AP981WX can be configured through a PC/NB by using its web browser such as Internet
Explorer version 6.0.
 Default IP Address : 192.168.2.254
 Default IP Netmask : 255.255.255.0
 Default User Name and Password : admin / default
Step
 IP Segment Set-up for Administrator's PC/NB
Set the IP segment of the administrator's computer to be in the same range as AP981X/AP981WX
for accessing the system. Do not duplicate the IP Address used here with IP Address of
AP981X/AP981WX or any other device within the network
Example of Segment :
The value for underlined area can be changed as desired; the valid range is 1 ~ 254. However,
254 shall be avoided as it is already used by AP981X/AP981WX; use 10 as an example here.
 IP Address : 192.168.2.10
 IP Netmask : 255.255.255.0
 Launch Web Browser
Launch as web browser to access the web management interface of system by entering the
default IP Address, http://192.168.2.254, in the URL field, and then press Enter
 System Login
The system manager Login Page then appears.
Enter “admin” as User name and “default” as Password, and then click OK to login to the
system.
 Login Success
System Overview page will appear after successful login.
10