User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
Step 5 : Enable WDS Peer's MAC Address
Click Wireless -> WDS Setup, and then WDS Setup page appears.
Enable “WDS Peer's MAC Address”, and then enter the related information. Click Save button to
save the settings.
Step 6 : Wireless General Settings
Click Wireless -> General Setup, and then General Setup page appears.
Select the “Channel” and “Transmit Rate Control” informations required in the General Setup
field. The informations must the same the other WDS device.
Click Reboot to activate all settings configured so far.
Congratulation !
The WDS mode is now successfully configured.
17