User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
3.1.5 SNMP Setup
SNMP is an application-layer protocol that provides a message of format for communication between
SNMP managers and agents. By enabling SNMP function, the administrator can obtain the system
information remotely. Please click on System -> SNMP Setup and follow the below setting.
 v2c : Check v2c button to activate SNMP v2c agent or unchecked to deactivate this function.
 ro community : Enter the community strings that allows read-only access to the system's
SNMP information.
 rw community : Enter the community strings that allows read/write access to the system's
SNMP information.
 v3 : Check v3 button to activate SNMP v3 agent or unchecked to deactivate this function.
SNMPv3 supports the highest available levels of security for SNMP communication.
 SNMP ro user : Enter the community strings that allows read-only access to the system's
SNMP information.
 SNMP ro password : Enter the password that allows read-only access to the system's SNMP
information.
25