User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
3.2.2 Advanced Setup
The administrator can change the Slot Time, ACK/CTS Timeout, RTS threshold and fragmentation
threshold settings for the system. Please click on Wireless -> Advanced Setup and follow the
below setting.
 Slot Time : Enter the desired slot time for the AP.
 ACK Timeout : The time interval for waiting the “ ACKnowledgment frame”. If the ACK is not
received within that timeout period then the packet will be re-transmitted. Higher ACK Timeout
will decrease the packet lost, but the throughput will be growing worse.
 CTS Timeout : Enter the desired CTS timeout for the AP.
Note : Slot Time and ACK/CTS Timeout settings for long distance links. It is important to
change the value to find the optimal setting. A value too low will give very low throughput,
A high value may slowdown the link.
 RSSI Threshold : RSSI Threshold can be used to control the level of noise received by the
device.
 Beacon Interval : Enter a value between 10 and 5000 msec. The default value is 100
milliseconds. The entered time means how often the beacon signal transmission between the
access point and the wireless network.
29