User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
 DTIM Interval : Input the DTIM Interval that is generated within the periodic beacon at a
specified frequency. Higher DTIM will let the wireless client save energy more, but the throughput
will be growing worse.
 Fragment Threshold : The value specifies the maximum size of packet allowed before data is
fragmented into multiple packets. Please use this value to tune the wireless connection if lots of
retransmission happens. Enter a value ranging from 256 to 2346.
 RTS Threshold : Tuning the Request to Send, RTS threshold will help the system control its
access to medium and alleviate the hidden node problem. Enter a value ranging from 1 to 2346.
 Short Preamble : The short preamble provides 56-bit Synchronization field to improve WLAN
transmission efficiency. Check Enable button for using Short Preamble, and Disable for using
the Long Preamble, 128-bit Synchronization field, option.
 Tx Burst : Click Enable button for using Tx Burst, and Disable for non using Tx Burst.
 802.11g Protection Mode : Click Enable button for using 802.11g Protection Mode, and
Disable for non using 802.11g Protection Mode.
Change these settings as described here and click Save button to save your changes. Click Reboot
button to activate your changes. The items in this page is for WDS's RF general settings and will be
applied to all WDS Links.
62