User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
4.2.3 WDS Setup
The administrator can create WDS Links via this page. Please click on Wireless -> WDS Setup and
follow the below setting.
 WMM : Select Enable, the packets with QoS WMM will has higher priority.
 Security Type : Configure an appropriate security type for the WDS link, either Disabled or
WEP; the type needs to be the same as that configured on WDS peer.
 Key Length : Select the desire option are 64 bits, 128 bits or 152 bits from drop-
down list.
 Key : Provide the WEP key value. The key value should be HEX digits format.
 Enable : Click Enable button to create WDS link.
 WDS Peer's MAC Address : Enter the MAC address of WDS peer.
 VLAN ID : Virtual LAN, the system supports tagged VLAN. To enable VLAN function; valid values
are from 1 to 4094; 0 is disabled.
 Description : Description of WDS link.
Change these settings as described here and click Save button to save your changes. Click Reboot
button to activate your changes
63