User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
5.2 Using the CLI
After accessing the CLI, the administrator can use command on the system.
Command Description
help Display all commands description
show info Display System and LAN informations
pwinfo Wireless Information Display Utility
set Configure LAN IP address, netmask, gateway, and system mode.
reboot Restart the system
default Restore system default setting
password Change admin password
Table 5-1: System command list
 Using pwinfo command : Type pwinfo command, the Wireless Information Display Utility
appears.
 Choose Device : Select the desired physical interface name of wireless.
 AP Mode : Enable all of Virtual AP, the Choose Device window will be display ath0 to
ath7. Enter the desired device, the window will be display result.
74