User's Manual

User Manual
AP981X/AP981WX In-Wall Poe Wireless-G AP/Bridge
affected with surrounding existence of 802.11b stations
RTS and Fragmentation control
Adjustable transmission power : 9 Levels
Wireless site survey : for scanning the surrounding access points for connection
VLAN tag support
Security
Data encryption : WEP (64/128/152-bits), WPA/WPA2 with TKIP or AES-CCMP
User Authentication : WEP, IEEE 802.1X, WPA-PSK, WPA-Enterprise, MAC ACL
Setting for TKIP/ CCMP/AES key's refreshing period
Support IEEE 802.11 mixed mode; open and shared key authentication
Hidden ESSID : broadcast SSID option can be turned off to prevent SSID broadcast to the public
Station Isolation setting : when enabled, all stations associated with this AP can not
communicate with each other
Support data encryption and VLAN tag over WDS link
Administration
Web-based management interface
Remote configuration and management
Remote firmware upgradeable
Software one-button-click to reset back to factory defaults
Utilities for system configuration backup and restoration
SNMP MIBII support (v2c/ v3)
NTP time synchronization
DHCP client
Syslog client
Support Event Log
Support statistics on total transmission encountered and transmitting error occurred
Hardware Specifications
LED Indication : Power x 1; Ethernet x 1; WLAN x 1
EZ-Connection with security Push Button
Reset/Restart Push Button
4